Diode LED BLAZE 200 Wet Location Strip Light 24V 100 ft Spool

Product Overview

The Diode LED DI-24V-BLBSC2-27-W100 is a 24 Volt BLAZE 200 tape light supplied on a 100 ft spool. It produces 209 lumens per foot at 2700K with a CRI of 90+ for task and accent lighting.

This low-voltage tape light is wet-location rated for indoor wet areas, is dimmable, offers 2 in cut intervals, and supports single continuous runs up to 40 ft.

Key Features

• 209 lumens per foot at 2700K with 90+ CRI
• 2.93 watts per foot
• Cut points every 2 inches
• Single continuous runs up to 40 feet
• Wet-location rated for indoor wet locations
• Dimmable with compatible 24V constant-voltage drivers
• UL Listed to standard 2108

Function — light output and color

This model delivers 209 lumens per foot at 2700K with a CRI of 90+, intended for close-view task and accent lighting where color rendering is important.

• Color temperature: 2700K
• Light output: 209 lm/ft
• Color rendering: 90+ CRI

Applications — common uses

Typical uses include under-cabinet and shelf task lighting, cove and millwork accent lighting, and display or retail illumination.

• Under-cabinet and shelf task lighting
• Cove and millwork accent lighting
• Display and retail lighting

Electrical and dimming requirements

The tape light operates on a 24 Volt constant-voltage platform and draws 2.93 W per foot. It is dimmable when used with compatible 24V constant-voltage drivers and controls. Size the driver above the total wattage of the run.

• Voltage: 24 Volt constant-voltage
• Power draw: 2.93 W/ft
• Dimmable with compatible 24V drivers/controls
• Maximum single run: 40 ft

Mechanical configuration

The product is supplied on a 100 ft spool with cut points every 2 inches. Single continuous runs up to 40 ft are supported; for longer layouts plan additional feeds or power injection per design requirements.

• Spool length: 100 ft
• Cut interval: 2 in
• Single run limit: 40 ft

Certifications and location rating

This model is UL Listed to standard 2108 and is rated for indoor wet locations.

• UL Listed: 2108
• Location rating: Indoor / Wet Location

Before You Order

Confirm the SKU and color temperature before ordering. This page describes the 2700K SKU (DI-24V-BLBSC2-27-W100). Ensure you select a compatible 24V constant-voltage driver sized above the total run wattage and follow local electrical codes for wet-location indoor installations.

• Verify model: DI-24V-BLBSC2-27-W100 (2700K)
• Driver requirement: 24V constant-voltage, rated above calculated run wattage

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 200 Wet Location Strip Light 24V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.