Diode LED BLAZE 200 Wet Location Strip Light 12V 100 ft Spool

Product Overview

The Diode LED BLAZE 200 (DI-12V-BLBSC2-27-W100) is a 12 Volt LED tape light rated for indoor wet locations. This SKU provides 206 lumens per foot at 2700K with 90+ CRI, on a 100 ft spool with 1 in cut intervals. It draws 2.93 W per foot, supports single runs up to 20 ft, and is UL Listed to 2108.

Designed for low-voltage task and accent lighting where high color rendering is desired, the tape light is dimmable with compatible 12V constant-voltage drivers.

Key Features

• 206 lm/ft at 2700K with 90+ CRI
• 12V low-voltage tape light — 2.93 W/ft
• Cut points every 1 in
• Maximum single run: 20 ft
• Rated for Indoor / Wet Location and UL Listed (2108)
• Dimmable with compatible 12V constant-voltage drivers

What this strip light does

The Diode LED BLAZE 200 12V tape light provides continuous linear illumination for task, accent, and display applications where warm appearance and high color fidelity are desirable. It is supplied on a 100 ft spool and intended for indoor wet-location-rated environments.

Light output and electrical performance

This SKU delivers 206 lumens per foot while drawing 2.93 watts per foot. It operates on a 12 Volt constant-voltage system, is dimmable with compatible controls, and supports single runs up to 20 ft.

• Lumen output: 206 lm/ft
• Power draw: 2.93 W/ft
• Color temperature: 2700K
• Color rendering: 90+ CRI
• Maximum recommended single run: 20 ft

Typical applications

Common uses include under-cabinet and shelf task lighting, cove and millwork accent lighting, and retail/display illumination where close-view color rendering is important.

• Under-cabinet and shelf task lighting
• Cove and millwork accent lighting
• Display and retail lighting

Driver and installation requirements

The tape light requires a 12 Volt constant-voltage driver sized above the total run wattage. Observe the 20 ft maximum single-run recommendation and plan additional feeds or separate runs if needed. Cut intervals are every 1 in for field trimming.

• Requires a 12V constant-voltage driver; driver wattage should exceed the total run wattage
• Cut interval: 1 in
• Dimmable with compatible 12V constant-voltage dimmable drivers and controls

Technical specifications

Use these SKU-specific facts for planning and specification reference.

• Brand: Diode LED
• Model / SKU: DI-12V-BLBSC2-27-W100
• Voltage: 12 Volt
• Wattage: 2.93 W/ft
• Lumens: 206 lm/ft
• Color Temperature: 2700K
• CRI: 90+
• Cut Interval: 1 in
• Max Run: 20 ft
• Dimmable: Yes
• Location Rating: Indoor / Wet Location
• Certification: UL Listed 2108
• Packaged: 100 ft spool

Before You Order

Confirm SKU and color temperature, and calculate total run wattage to select an appropriate 12V constant-voltage driver.

• This SKU is DI-12V-BLBSC2-27-W100 (2700K); a 3000K option is a separate SKU (DI-12V-BLBSC2-30-W100).
• Multiply run length by 2.93 W/ft to determine wattage; choose a driver rated above that value.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 200 Wet Location Strip Light 12V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.