Diode LED BLAZE 200 LED Tape Light 12V 100 ft Spool

Product Overview

Diode LED DI-12V-BLBSC2-27-100 is a 2700K, 12 Volt LED tape light supplied on a 100 ft spool for interior task, accent, and display lighting.

The tape produces 212 lumens per foot at 2.93 W/ft, has 1 in cut intervals, and a manufacturer-specified maximum single run of 20 ft.

Key Features

• 2700K color temperature with 90+ CRI
• 212 lm/ft luminous output at 2.93 W/ft
• Cut points every 1 inch
• 12 Volt constant-voltage format with single runs up to 20 ft
• Dimmable (depends on driver) and UL Listed to UL 2108
• Rated for indoor / damp locations

What this tape light does

The DI-12V-BLBSC2-27-100 provides warm-white illumination (2700K) intended for interior task, accent, and display lighting. Its 90+ CRI supports accurate color rendering in close-view applications.

• Common uses: under-cabinet task lighting, cove and millwork accent, shelf and display lighting
• Supplied on a 100 ft spool for multiple runs or long runs divided as needed

Performance and electrical load

Use the rated outputs to size power and estimate visual performance. The tape delivers 212 lumens per foot while drawing 2.93 watts per foot on a 12V constant-voltage platform.

• Luminous output: 212 lm/ft
• Power: 2.93 W/ft
• Optical: 120° beam angle

Installation and configuration

Plan installations around the tape's mechanical and electrical limits. Cut points occur every 1 inch. Observe the maximum single run length to manage voltage drop and power feeds.

• Cut interval: 1 in
• Maximum recommended single run: 20 ft
• Requires a 12V constant-voltage driver sized above the total run wattage
• Dimmable — dimmer compatibility depends on the chosen driver

Certifications and location rating

This product is UL Listed to UL 2108 for low-voltage lighting and is rated for indoor / damp locations.

• Certification: UL Listed 2108
• Location rating: Indoor / Damp Location

Before You Order

Confirm the model and color temperature before ordering; this SKU is the 2700K variant on a 100 ft spool.

• You will need a 12V constant-voltage driver sized above the total wattage of your planned runs.
• Keep individual runs to the recommended 20 ft maximum or plan additional feeds to manage voltage drop.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 200 LED Tape Light 12V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.