Diode LED BLAZE 100 Wet Location Strip Light 24V 100 ft Spool

Product Overview

100-foot spool of Diode LED BLAZE 100 low-voltage LED tape for indoor wet-location use.

Delivers 106 lumens per foot at 2700K (also offered in 3000K), draws 1.46 W/ft, and has a CRI of 90+.

Key Features

• 24 Volt constant-voltage tape light — 100 ft spool
• 106 lm/ft (2700K) and 1.46 W/ft
• 90+ CRI for accurate color rendering
• Cut points every 4 in
• Maximum single run: 55 ft
• Dimmable
• UL Listed to UL 2108
• Rated for indoor wet locations

What this product is for

The Diode LED BLAZE 100 24V 100 ft spool is a low-voltage LED tape intended for interior task, accent, and display lighting where an indoor wet-location rating is required.

• Common uses: under-cabinet task lighting, cove and millwork accent lighting, and display or retail illumination

Light output and electrical load

Use this tape where moderate output and high color fidelity are needed; its wattage per foot supports predictable total-run calculations.

• Light output: 106 lm/ft (specified for the 2700K SKU)
• Power draw: 1.46 W/ft
• CRI: 90+

Lengths, cut points, and run limits

The product is supplied as a 100 ft spool with regular cut intervals and a specified maximum single run.

• Spool length: 100 ft
• Cut interval: 4 in
• Maximum single run: 55 ft

Location rating and certification

Check environmental suitability for your installation based on the product ratings.

• Location rating: Indoor / Wet Location
• Certification: UL Listed to UL 2108

Driver and dimming requirements

This tape is designed for 24 Volt constant-voltage systems and is described as dimmable; select drivers and dimming controls compatible with 24V LED tape.

• Requires 24V constant-voltage driver
• Driver should be sized above the total run wattage (total feet × 1.46 W/ft)
• Use dimming controls and drivers rated for 24V LED tape dimming

Before You Order

Confirm the desired SKU (2700K or 3000K) and required quantity. This product requires a 24V constant-voltage driver sized above the total run wattage.

• Verify color temperature: DI-24V-BLBSC1-27-W100 = 2700K; DI-24V-BLBSC1-30-W100 = 3000K
• Calculate driver size: total feet × 1.46 W/ft, then select a driver with greater rated output
• Plan feeds so no single continuous run exceeds 55 ft

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 100 Wet Location Strip Light 24V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.