Diode LED 3-Way DC Splitter 5 Pack

Product Overview

Five-pack of Diode LED 3-way DC splitters for distributing low-voltage power from a single driver to up to three LED runs.

Plug-in DC barrel connections allow connections without stripping or soldering; specified for 12–24V DC systems. Available in White (SKU DI-0705-5) and Black (SKU DI-0705B-5).

Key Features

• Splits one DC feed into three outputs for powering multiple LED tape or fixture runs
• Plug-in DC barrel connections — no soldering or wire-stripping required
• Specified for 12–24V DC
• Sold as a package of 5 identical splitters
• Two finish options: White (DI-0705-5) and Black (DI-0705B-5)

What this splitter does

The Diode LED 3-way DC splitter divides a single low-voltage DC feed into three separate outputs, allowing one driver to feed multiple short LED runs. Each unit provides three DC barrel output connections for distribution without custom wiring.

• Use to branch or extend LED tape and fixture runs
• Helps organize power distribution when multiple runs are needed from a single feed

Voltage and electrical compatibility

The splitters are specified for 12–24V DC systems. Confirm your driver output voltage and the combined load of connected LED runs before use.

• Specified voltage: 12–24V DC
• Verify driver output voltage and total load capacity prior to connecting multiple runs

Connector type and installation approach

These splitters use DC barrel plug-style connections that plug in without stripping or soldering. Check that barrel size and polarity match your LED tape, fixtures, and driver before making connections.

• Plug-in DC barrel connections — no soldering required
• Confirm barrel size and polarity compatibility before connecting

Size and finish options

Each splitter measures approximately 8 inches in length with a diameter of about 0.6 inches. Sold in packs of five, available in White or Black under separate SKUs.

• Dimensions: Length = 8", Diameter = 0.6"
• Package quantity: 5 per pack
• Available SKUs: DI-0705-5 (White) and DI-0705B-5 (Black)

Before You Order

Verify the selected SKU (DI-0705-5 or DI-0705B-5) and confirm the splitter's DC barrel connector size, polarity, and system voltage (12–24V DC) match your LED components.

• Check driver output voltage and total load capacity for the combined runs
• Confirm barrel connector size and polarity compatibility

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED 3-Way DC Splitter 5 Pack. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.