BRSF150 - Cutler Hammer 150A 240V 2-Pole BR Frame Sub Feed Lug Block Circuit Breaker

Product Overview

The BRSF150 is a Cutler Hammer 150 amp, 240 volt, 2-pole circuit breaker built on the BR frame and fitted with a sub-feed lug block.

Designed for panelboard and load-center applications that require a 2-pole protective device with provisions for sub-feed lugs; sold as SKU BRSF150. Request a quote for pricing and availability.

Key Features

• 150 A continuous rating, two-pole 240 V configuration
• BR frame footprint compatible with BR-series panelboards and load centers
• Integrated sub-feed lug block for subfeed or tap conductor connections
• Manufacturer: Cutler Hammer; Condition: New

What this breaker does

The BRSF150 is a 2-pole circuit breaker that provides overcurrent protection for 240 V circuits up to 150 amps while also incorporating a sub-feed lug block to accept feed-through or tapped conductors. It is intended for use in panelboard or load-center installations that require a BR-frame breaker with sub-feed capability.

Electrical rating and basic requirements

Use this breaker where a 150 A, two-pole protective device rated for 240 V service is required. The breaker’s ampacity and pole count are specified by the model designation.

• Ampacity: 150 A
• Voltage: 240 V
• Poles: 2

Panel and frame compatibility

The BRSF150 uses the Cutler Hammer BR frame. It is intended for systems and load centers that accept BR-frame breakers. Confirm physical and bus compatibility with the specific panelboard manufacturer and model before ordering or installing.

Sub-feed lug block and conductor connections

This breaker includes a sub-feed lug block to facilitate subfeeding or tapping downstream circuits from the breaker location. The lug block provides a permanent connection point for additional conductors as part of the electrical distribution configuration.

• Includes integrated sub-feed lug block
• Use appropriate conductor sizes and torque values per local code and panel manufacturer instructions

Before You Order

Confirm the model number and quantity required before ordering. Verify panelboard compatibility, bus type, and conductor sizing with project specifications and local electrical code.

• Confirm the BRSF150 matches the panel manufacturer’s accepted BR-frame breakers
• Verify required torque values and conductor sizes from the panel or breaker documentation
• Request a quote from Lumera Electric for pricing and availability

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for BRSF150 - Cutler Hammer 150A 240V 2-Pole BR Frame Sub Feed Lug Block Circuit Breaker. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.