WIRE-15-4PIN 15ft (20/4) Wire Spool

Product Overview

15-foot spool of 20 AWG, 4-conductor (20/4) wire intended for tape-light and low-voltage lighting installations.

Sold as a single spool (SKU WIRE-15-4PIN) and supplied by American Lighting.

Key Features

• Length: 15 feet of continuous 20 AWG cable
• Conductor count: 4 (four-pin configuration)
• Suitable for tape-light and other low-voltage 4-wire applications
• Sold as individual spool (SKU WIRE-15-4PIN)

What this wire is for

This product is a 15-foot spool of 20 AWG, 4-conductor (20/4) cable sold by American Lighting under SKU WIRE-15-4PIN. It is intended for use with tape-light and other low-voltage lighting assemblies that require a four-pin connection.

• Common use: connecting 4-pin LED tape light runs, controllers, or 4-wire low-voltage fixtures
• Sold as a single 15 ft spool

Electrical and conductor details

Use this spool when a 20 AWG conductor and four separate conductors are required. The product listing identifies the gauge and conductor count but does not provide insulation type, voltage rating, or temperature ratings—confirm those requirements against your project specifications.

• Conductor gauge: 20 AWG
• Conductor count: 4 (four-pin)

Installation and typical uses

The 15-foot length is suitable for short branch runs between controllers or power supplies and LED tape segments. It can be used for tidy connections within cabinets, under counters, or other installations where a 15 ft reach is sufficient.

• Typical installations: short runs for LED tape, RGB or RGBW tape connections that use a 4-pin interface
• Not enough information provided here to confirm compatibility with specific connectors—verify connector type and pinout before installation

Before you order

Confirm the model number, length, and conductor requirements for your installation before purchasing. This product listing provides gauge, conductor count, and spool length but does not include detailed ratings or connector information.

• Verify that a 15 ft length and 20 AWG, 4-conductor cable meets your voltage drop and current requirements
• Confirm connector type, pinout, and insulation/voltage rating as needed for your application

Before You Order

Confirm the model number and quantity required before ordering. This listing specifies length, conductor gauge, and conductor count but does not include insulation type, maximum voltage, temperature rating, or connector compatibility.

• Check that 20 AWG conductors meet your current and voltage-drop needs for the intended run length
• Verify connector type, pinout, and compatibility with your tape-light, controller, or power supply
• If you need different lengths, gauges, or ratings, select a product specified for those requirements

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for WIRE-15-4PIN 15ft (20/4) Wire Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.