TL-CONKIT Tape Light Accessory Trulink 4-in-1 Power Feed Single Color

(No Ratings)
SKU: TL-CONKIT
Price: $8.64
10% Off First Order | Min. Spend 200$

Description

Product Overview

TL-CONKIT is a 2-wire power feed accessory for single-color IP54 tape light. It includes factory-attached lead wires and 3M VHB backing for placement at the connection point.

Intended for use with single-color tape systems operating at 12 or 24 volts, the kit provides a 36" 18 AWG connection to the tape and an attached 72" 18 AWG supply lead.

Key Features

  • 2-wire power feed for single-color IP54 tape light
  • 36" 18 AWG lead to tape; attached 72" 18 AWG supply lead
  • 3M VHB adhesive backing for mounting
  • Compatible with 12V and 24V single-color tape (per product notes)
  • Sold individually (SKU: TL-CONKIT)

What this accessory does

TL-CONKIT provides a factory-prepared 2-wire power feed to connect single-color IP54 tape light to a power source. The kit includes pre-attached leads and adhesive backing to simplify placement of the connection point.

Electrical compatibility & wiring

The product information lists compatibility with 12V and 24V single-color tape. It uses 18 AWG conductors supplied as two leads: a 36" lead to the tape and a 72" attached supply lead.

  • Listed for use with 12V or 24V single-color tape light
  • 36" 18 AWG lead to tape
  • 72" 18 AWG attached supply lead

Mounting and physical connections

TL-CONKIT includes 3M VHB adhesive backing to secure the connection point. Leads are factory-attached to reduce the need for field termination at the tape connection.

  • 3M VHB backing for adhesion
  • Factory-attached leads

Technical specifications

Key documented attributes for SKU TL-CONKIT are listed below.

  • SKU / Part Number: TL-CONKIT
  • Wire: 18 AWG (36" lead to tape; 72" attached supply lead)
  • Voltage: 12/24V (single-color tape compatibility noted)
  • Adhesive: 3M VHB backing
  • Sold as: Each
  • Weight: 0.1 lb

Before You Order

Confirm TL-CONKIT matches the tape light type and voltage in your project and that the listed lead lengths and 18 AWG gauge suit your installation.

  • Confirm model number TL-CONKIT before purchasing
  • Verify voltage (12V or 24V) and single-color IP54 tape compatibility
  • Check that 36" and 72" lead lengths meet your run requirements

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for TL-CONKIT Tape Light Accessory Trulink 4-in-1 Power Feed Single Color. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.

Specifics

BrandAmerican Lighting
SKUTL-CONKIT
Product typeTape Light Accessory
Compatible WithSingle-color IP54 tape light; 12V or 24V (per product notes)
Wire to tape36" 18 AWG
Supply lead72" 18 AWG (attached)
Adhesive3M VHB backing
Pack QuantityEach
Weight0.1 lb

Comments

Tape Light Accessory Trulink 4-in-1 Power Feed Single Color - American Lighting TL-CONKIT

TL-CONKIT Tape Light Accessory Trulink 4-in-1 Power Feed Single Color

Price: $8.64
10% Off Your First Order Min. Spend 200$