PS-60-24VPI Plug-in Driver 60 Watts 24V DC

Product Overview

The PS-60-24VPI is a plug-in 24V DC power supply rated for 60 watts. It provides a compact, ready-to-use source of 24V DC power for compatible low-voltage lighting and electronic applications.

This SKU is sold individually and ships as a single plug‑in driver with dimensions 4.93" (L) × 2" (W) × 1.25" (H) and a shipped weight of approximately 1 lb.

Key Features

• Output: 24V DC, 60 watts total capacity
• Plug-in form factor for easy installation without hardwiring
• Compact footprint: 4.93" L × 2" W × 1.25" H
• Sold as a single unit (SKU: PS-60-24VPI)

Function

The PS-60-24VPI supplies regulated 24V DC power with a maximum output capacity of 60 watts. Its plug‑in design provides a convenient means to power 24V LED modules, strips, and other low‑voltage devices where a compact external supply is acceptable.

• Intended as a plug‑in external power supply (no hardwiring required).
• Provides a single 24V DC output up to 60W total.

Dimensions & Weight

Confirm physical fit before installation. The PS-60-24VPI is compact and suited to installations where wall outlets are accessible.

• Length: 4.93 inches
• Width: 2 inches
• Height: 1.25 inches
• Weight: approximately 1 lb (454 g)

Technical Specifications

Key specs below summarize the electrical capacity and packaging for this exact SKU (PS-60-24VPI).

• Model / SKU: PS-60-24VPI
• Output voltage: 24V DC
• Maximum output power: 60 watts
• Form factor: Plug-in power supply
• Sold as: Each

Compatibility & Use

This driver is intended for use with devices that accept a 24V DC input and whose combined load does not exceed 60 watts. Verify that your target equipment accepts 24V DC and that total wattage stays within the driver’s 60W rating.

• Do not exceed the 60W total load for connected devices.
• Confirm connector and polarity compatibility with your fixtures or wiring prior to installation.

Before You Order

Confirm the model number and electrical requirements for your application before ordering. This page describes only the single SKU PS-60-24VPI.

• Verify that your load accepts 24V DC and that total wattage does not exceed 60W.
• Confirm connector type and polarity compatibility with your fixtures or wiring.
• If you need certification details, input/output connectors, or mounting accessories, confirm those requirements prior to purchase as they are not specified here.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for PS-60-24VPI Plug-in Driver 60 Watts 24V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.