Orbit Roof Coupling W 8 in X8" Plate, RIGID 1-1/2 in RCP150

Product Overview

The Orbit RCP150 is a roof coupling with an 8 in x 8 in mounting plate specified for use with 1-1/2 in rigid conduit. It is intended for electrical junctions, device mounting, enclosure installations, and rough‑in work.

Confirm plate footprint, conduit size, knockout pattern, cover compatibility, device fit, box fill, and applicable codes before installation or ordering.

Key Features

• Manufacturer: Orbit (Model/SKU RCP150)
• 8 in x 8 in mounting plate
• Specified for 1-1/2 in rigid conduit
• For junctions, device mounting, enclosure rough‑in, replacement, and maintenance
• SKU used for procurement and inventory control

What this coupling does

The Orbit RCP150 is a roof coupling intended to provide a mounting interface via an 8 in x 8 in plate and to connect to 1-1/2 in rigid conduit where that configuration is required. It is identified by Orbit catalog number RCP150 for purchasing and inventory.

• Provides a mounting plate and a conduit connection point
• Used for junctions, device mounting, and rough‑in tasks
• Catalog identifier: RCP150

Plate size and conduit size

This SKU is listed with an 8 in x 8 in plate and a conduit connection specified as 1-1/2 in rigid. Confirm these dimensions match the project drawings and the enclosure or opening where it will be mounted.

• Mounting plate: 8 in x 8 in
• Conduit connection: 1-1/2 in rigid

Common applications

The RCP150 is described for use in junction and device box installations, electrical rough‑in, replacement projects, and facility maintenance. It is commonly held as a contractor SKU for jobsite stocking.

• Junction and device box installations
• Electrical rough‑in and retrofit work
• Replacement and maintenance tasks
• Contractor supply and jobsite stocking

Pre‑order checks

Before ordering the RCP150, verify the model number and ensure the plate size and conduit connection align with your enclosure, cover, device, and local code requirements. Match the SKU to project drawings or approved submittals.

• Confirm model/SKU RCP150 and required quantity
• Verify plate footprint, knockout pattern, and cover compatibility
• Perform box fill and device fit checks and confirm local code compliance

Before You Order

Confirm the model number and that the plate size and conduit connection match your project requirements before ordering.

• Match SKU RCP150 to project drawings or approved submittals
• Verify plate footprint, knockout pattern, and cover compatibility

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Orbit Roof Coupling W 8 in X8" Plate, RIGID 1-1/2 in RCP150. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.