Orbit 3-1/2 in 45 Degree EMT Conduit Elbow EEL-45-350

Product Overview

The Orbit EEL-45-350 is a factory-bent 45° EMT conduit elbow sized for 3-1/2 in trade EMT. It provides a preformed steel fitting to change conduit direction without field bending.

Constructed of galvanized steel and UL listed for dry locations, this elbow is intended for use in EMT raceway systems in commercial and maintenance installations.

Key Features

• Trade size: 3-1/2 in EMT conduit
• Bend angle: 45° factory-bent elbow
• Material and finish: steel, galvanized
• Intended use: EMT raceway systems to reduce field bending
• Certification: UL listed (location rating: dry)

Function and purpose

The Orbit EEL-45-350 provides a preformed 45° bend for 3-1/2 in EMT conduit runs, allowing electricians to change conduit direction without performing field bending. Using a factory-bent elbow preserves conduit integrity and speeds installation compared with manual bending.

• Reduces on-site bending labor
• Designed for EMT raceway systems

Common applications

This elbow is specified for commercial and maintenance electrical work where a 45° direction change is required in 3-1/2 in EMT. Typical uses include rough-in, conduit runs to devices or equipment, retrofit raceway adjustments, and contractor stock.

• Commercial raceway installation
• Service conduit runs and electrical rough-in
• Retrofit and facility maintenance projects

Technical specifications

Key technical points below describe the model-level attributes of the EEL-45-350. Use these facts to confirm the part fits the intended conduit and code requirements.

• Brand: Orbit
• Model / SKU: EEL-45-350
• Trade size: 3-1/2 in
• Bend angle: 45°
• Material: Steel
• Finish: Galvanized
• Location rating: Dry location
• Certifications: UL

Compatibility and installation notes

Confirm the EEL-45-350 catalog number and trade size against project drawings and the conduit being used. Installation must be performed by qualified electrical personnel and checked against local electrical codes and project specifications.

• Verify box or conduit compatibility before ordering
• Confirm material, finish, and location rating meet project requirements
• Installation should conform to applicable electrical standards

Before You Order

Confirm the model number and trade size required for your project. Verify compatibility with the conduit, boxes, and local code requirements. Have a qualified electrician review installation requirements before purchasing.

• Confirm model: EEL-45-350
• Confirm trade size: 3-1/2 in EMT
• Verify dry-location suitability and UL listing meet project needs

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Orbit 3-1/2 in 45 Degree EMT Conduit Elbow EEL-45-350. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.