Orbit 3/4 in Zinc Strain Relief Cord Grip Connector CG-75625750

Product Overview

The Orbit CG-75625750 is a zinc die-cast strain relief cord grip connector sized for 3/4 in trade openings and designed to secure and seal cords entering enclosures.

It fits cable diameters from 0.625 in to 0.750 in, provides a watertight entry when installed correctly, and carries UL certification.

Key Features

• Trade size: 3/4 in cord grip connector
• Cable range: 0.625 in to 0.750 in
• Material and finish: zinc die-cast body with zinc finish
• Watertight connector format (when installed correctly)
• Strain relief design to secure and seal cords entering enclosures
• UL listed

What this connector does

The Orbit CG-75625750 is a strain relief cord grip connector that secures and seals cables where they enter enclosures, boxes, or equipment. Its design reduces mechanical strain on cable terminations and helps maintain a watertight entry when assembled correctly.

• Prevents cable pull-out and protects internal connections
• Provides a sealed passage for power and control cables into enclosures

Size and cable compatibility

Confirm trade size and cable diameter before selecting the connector. The CG-75625750 is specified for a 3/4 in trade opening and accepts cable or cord diameters in the range shown below.

• Trade size: 3/4 in
• Accepts cable diameter range: 0.625 in to 0.750 in

Materials, finish, and environmental rating

The connector body is zinc die-cast with a zinc finish. When installed per manufacturer instructions, the connector provides a watertight entry suitable for wet locations.

• Material: zinc die-cast
• Finish: zinc
• Location rating: wet location / watertight when installed correctly
• Certification: UL listed

Typical applications

The CG-75625750 is intended for commercial and industrial electrical installations where cables must be routed into enclosures with mechanical protection and a sealed entry.

• Cord and cable entries into boxes and panels
• Control panels and equipment enclosures
• Commercial equipment wiring and industrial maintenance
• Replacement of watertight fittings and contractor stock

Installation and verification

Installation should be performed by qualified electrical personnel and verified against project drawings, field conditions, and applicable electrical codes. Correct assembly is required to achieve the watertight rating.

• Confirm model number and trade size match the application
• Verify cable outer diameter falls within 0.625–0.750 in before installing
• Check box/conduit compatibility and local code requirements prior to installation

Before You Order

Confirm the model number, trade size, and cable diameter required for your installation before ordering. Ensure a qualified electrician completes installation and that the selected connector meets local code and project requirements.

• Verify cable outer diameter is between 0.625 in and 0.750 in
• Confirm 3/4 in trade opening and enclosure compatibility
• Provide CG-75625750 as the SKU when requesting quotes or replacements

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Orbit 3/4 in Zinc Strain Relief Cord Grip Connector CG-75625750. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.