Orbit 4S 2-Gang 1/4 in Raised Steel Device Ring 42025

Product Overview

The Orbit 42025 is a 4S device ring for mounting two devices to a 4 in square electrical box. It has a 1/4 in raised profile and is formed from 16 gauge sheet steel with a galvanized finish for typical dry-location wall device installations.

This SKU (42025) is intended for contractor and maintenance use where a 2-gang alignment on a 4S box is required.

Key Features

• 2-gang configuration
• 1/4 in raised profile
• 16 GA sheet steel construction
• Galvanized finish
• Fits standard 4 in x 4 in (4S) square electrical boxes
• Location rating: dry location
• Certifications listed: UL, RoHS

What this device ring does

The Orbit 42025 aligns and provides a mounting surface for two devices (such as switches or receptacles) on a 4 in square (4S) electrical box. The 1/4 in raised profile offers modest clearance for wall finishes and device depth.

• Designed for 4 in x 4 in (4S) square box device mounting
• Helps provide consistent device alignment for trim and cover installation

Material, finish and dimensions

Constructed from 16 gauge sheet steel with a galvanized finish. Face dimensions are nominally 4 in x 4 in as specified for 4S rings.

• Material: 16 GA sheet steel
• Finish: Galvanized
• Face dimensions: 4 in x 4 in

Typical applications

Suitable for wall device rough-in, device mounting, contractor stock and maintenance replacement where a 2-gang layout on a 4S box is required. Rated for dry locations per the product data.

• 4S square box device mounting
• Wall device rough-in and finish work
• Maintenance replacement and contractor stock

Compatibility and installation notes

Verify the electrical box is a standard 4 in square (4S) box and that a 1/4 in raised ring meets your wall finish and device depth requirements. This product is listed with UL and RoHS according to the product data. Use a qualified electrician for field wiring, grounding, device mounting, and final inspection.

• Confirm box size and that raised depth suits site conditions
• Check knockout requirements and wall finish thickness before ordering
• Have a qualified electrician perform wiring, grounding, and inspection

Before You Order

Confirm the model number, quantity, and that a 1/4 in raised 2-gang ring is appropriate for your 4 in square box and wall finish.

• Confirm box is a standard 4 in x 4 in (4S) square box
• Confirm raised depth and knockout needs match site conditions
• Use a qualified electrician for installation and final inspection

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Orbit 4S 2-Gang 1/4 in Raised Steel Device Ring 42025. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.