Nora Lighting NUTP13-W28-12-927/HW Custom Cut 28-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora NUTP13-W28-12-927/HW is a 120 V continuous LED tape light delivered as a custom-cut 28-foot run. It produces 330 lumens at 3.6 watts per foot with a warm 2700 K color temperature.

This SKU includes mounting clips and an 8-foot hardwired power cord and is intended for professional lighting installations that require a continuous, low-profile light source.

Key Features

• Performance: 330 lm per foot at 3.6 W (120 V)
• Color temperature: 2700 K (warm white)
• Length/configuration: 28-ft continuous run, custom cut
• Includes mounting clips and 8' hardwired power cord (HW)
• Designed for 120 V supply

What this tape light does

Direct answer: The NUTP13-W28-12-927/HW provides a continuous, low-profile source of warm white illumination for linear accent, under-cabinet, or cove lighting in residential and commercial interiors.

Use-case notes: It is supplied as a 28-foot continuous run intended for installations where a single uninterrupted length is required.

• Low-profile linear illumination for accent and task lighting
• Continuous run suitable for seamless visual lines

Light output and color

Direct answer: This SKU delivers 330 lumens at 3.6 watts per foot with a color temperature of 2700 K (warm white).

Design guidance: Use the stated lumen and wattage values to compare with other fixtures or to calculate total run lumens and power consumption for a project.

• Brightness: 330 lm per foot
• Power: 3.6 W per foot
• Color temperature: 2700 K (warm white)

Installation and supply requirements

Direct answer: The NUTP13-W28-12-927/HW is designed for connection to a 120 V supply and is provided with an 8-foot hardwired power cord for permanent connection.

Practical note: Confirm that the supply voltage and any upstream drivers or circuits meet the project's voltage and wattage headroom needs for the planned run length before installation.

• Requires 120 V supply
• Includes an 8' hardwired power cord (HW) for permanent connection
• Verify driver voltage and wattage headroom for the run length

Included components and configuration

Direct answer: This SKU ships as a 28-foot continuous LED tape run and includes mounting clips plus the 8' hardwired power cord.

Ordering note: The product is presented as a specific SKU (NUTP13-W28-12-927/HW); confirm the model number and required quantity when specifying or ordering for a project.

• 28-ft continuous run (custom cut configuration)
• Includes mounting clips
• Includes 8' hardwired power cord

Before You Order

Confirm the model number (NUTP13-W28-12-927/HW) and the quantity required before ordering. Verify that your project can provide a 120 V supply and that any upstream driver or circuit capacity accommodates the total wattage for the run.

• Verify 120 V supply and wattage headroom for the full run length
• Confirm mounting method and clearance for linear installation
• Check project requirements for color temperature (2700 K) and lumen output

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W28-12-927/HW Custom Cut 28-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.