Morris 91514 Irreversible Grounding Connector, 250 MCM - 2/0 AWG to 3/4" Rod

Product Overview

The Morris 91514 is an irreversible grounding connector for bonding a 250 MCM–2/0 AWG conductor to a 3/4-inch ground rod or rebar.

Made of pure electrolytic copper, it provides a permanent connection and is acceptable for direct burial in earth or concrete.

Key Features

• Connects a 250 MCM–2/0 AWG conductor to a 3/4-inch rod or rebar
• Pure electrolytic copper construction
• Permanent, irreversible connection
• Acceptable for direct burial in earth and concrete
• Suitable for Copperweld or copper-clad cable

Conductor and Rod Compatibility

The Morris 91514 is sized for a 250 MCM–2/0 AWG conductor and a 3/4-inch ground rod or rebar. It is also suitable for Copperweld or copper-clad cable.

Grounding Applications

Use this connector to bond a grounding conductor to a ground rod or rebar in grounding-electrode systems. It can provide a tap or pigtail from ground rods to a counterpoise or grid.

Permanent Connection and Burial

The 91514 makes an irreversible, permanent connection and is acceptable for direct burial in earth or concrete. Make the connection according to Morris’s installation instructions.

Before You Order

Confirm the conductor range and 3/4-inch rod or rebar diameter match your installation.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 91514 Irreversible Grounding Connector, 250 MCM - 2/0 AWG to 3/4" Rod. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.