Morris 22292 Nylon Cable Gland - Multi-Conductor - NPT Thread, 10"

Product Overview

The Morris 22292 is a 10" multi‑conductor cable gland with NPT thread that provides sealing and strain relief where flexible cords or multiple cables enter enclosures, motors, panels, and junction boxes.

Made from Nylon 6/6 with a UV resistant black finish, the gland is specified with IP68 ingress protection, a -22°F to 140°F temperature rating, and UL 94V-2 flammability rating. A locknut is not included.

Key Features

• Multi‑hole design to organize multiple cables within one gland
• Material: Nylon 6/6 (UL approved), UV resistant black
• Ingress protection: IP68
• Temperature rating: -22°F to 140°F
• Flammability rating: UL 94V-2
• NPT threaded connection
• Locknut not included

What this gland does

Direct answer: The Morris 22292 provides a sealed, strain‑relieving entry for multiple flexible cords or cables using an NPT threaded connection.

Its multi‑hole internal design organizes and seals several conductors inside a single fitting to help protect cable terminations from mechanical stress and contaminants when the gland is used as intended.

• Seals multiple cables through one threaded fitting
• Provides strain relief at the cable entry
• Helps maintain ingress protection when installed correctly

Materials and environmental ratings

Direct answer: The body is molded from Nylon 6/6 (listed as UL approved in the source) in UV resistant black and is specified with IP68 ingress protection.

The listing specifies a temperature range of -22°F to 140°F and a flammability rating of UL 94V-2.

• Material: Nylon 6/6 (UL approved)
• Color/finish: UV resistant black
• Ingress protection: IP68
• Temperature rating: -22°F to 140°F
• Flammability: UL 94V-2

Installation overview

Direct answer: Basic installation involves passing the cables through the gland, tightening the dome nut to compress the internal seal, and securing the assembly with a locknut on the inside of the enclosure.

A locknut is required but not included with this part; choose a locknut compatible with the gland's NPT thread and the enclosure wall thickness.

• Pass cables through the gland before seating in the enclosure
• Tighten the dome nut to compress the internal seal for strain relief
• Secure with a compatible locknut (sold separately)

Typical applications

Direct answer: The gland is intended for use where multiple flexible cords or cables enter enclosures such as motors, panels, and junction boxes.

The listed materials and ratings are suitable for a range of industrial and outdoor enclosures within the specified limits.

• Motor junction boxes
• Control panels and electrical enclosures
• Field junction boxes and outdoor cabinets

Before You Order

Confirm the model number and quantity before ordering and add a compatible locknut if required.

• Ensure the 10" trade size and the gland's multi‑hole layout suit your cable bundle
• Locknut is not included — purchase a locknut compatible with the NPT thread and enclosure thickness

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 22292 Nylon Cable Gland - Multi-Conductor - NPT Thread, 10". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.