Morris 14298 Aluminum Combination Conduit Body C Type, 1-1/2"

Product Overview

The Morris 14298 is a die-cast aluminum C-type combination conduit body sized for 1-1/2" trade conduits. It provides an access point for pulling conductors, splicing, and maintenance within a conduit run.

Connections are threaded for Rigid and IMC conduit and include a set-screw provision for EMT. The flat back design allows mounting close to walls. A gasketed cover is used to achieve rain-tight protection.

Key Features

• Die-cast aluminum construction
• C-type combination conduit body, 1-1/2" trade size
• Threaded connections for Rigid and IMC conduits
• Set-screw provision for EMT conduit
• Flat back design for close mounting
• Rain-tight when used with a gasketed cover

What this conduit body does

The Morris 14298 provides a C-type combination access point in a conduit run to facilitate pulling conductors, making splices, and performing maintenance. The access opening is intended for use where a pull point, change of direction, or splicing location is needed.

• Used at pull points, corners, and splice locations in conduit systems
• Provides an access opening for conductor pulling and splicing

Installation and mounting

Install the conduit body in the conduit run and route conductors through the access opening. Fit a gasketed cover to achieve rain-tight protection when required.

The flat back design permits mounting close to walls or other surfaces.

• Mount in the run following applicable conduit installation practices
• Use a gasketed cover to obtain rain-tight protection

Conduit compatibility

The 14298 accepts 1-1/2" trade size conduits. Connections are threaded for Rigid and IMC conduits; a set-screw provision is provided for EMT.

• Trade size: 1-1/2"
• Threaded for Rigid and IMC
• Set-screw provision for EMT

Materials and design

The body is die-cast from an aluminum alloy. The C-type combination shape offers an enlarged access area compared with smaller conduit bodies.

Rain-tight performance is achieved only when the unit is used with an appropriate gasketed cover.

• Material: Die-cast aluminum
• Flat back for close mounting
• Requires gasketed cover for rain-tight use

Before You Order

Confirm the model number and trade size to ensure it matches your conduit system requirements.

• Verify you need a 1-1/2" trade size, C-type combination conduit body
• Order a gasketed cover separately if rain-tight protection is required
• Confirm the conduit types (Rigid, IMC, EMT) you will connect to this body

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 14298 Aluminum Combination Conduit Body C Type, 1-1/2". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.