Morris 14132 Aluminum Rigid Conduit Body C Type, Threaded, 1"

Product Overview

The Morris 14132 is a die‑cast aluminum C‑type rigid conduit body with tapered (NPT) threaded hubs in 1" trade size. It provides access for pulling, splicing, and maintenance in conduit runs.

Designed with a flat back for close wall mounting and rated rain‑tight when used with a gasketed cover, the 14132 is a durable fitting for industrial and commercial conduit systems.

Key Features

• Die‑cast high‑strength aluminum alloy construction
• Tapered threaded hubs (NPT)
• Flat back design for mounting close to walls
• Rain‑tight when used with gasketed covers
• Provides access for pulling, splicing, and maintenance

Function and typical uses

The Morris 14132 C‑type conduit body provides an access point in a rigid conduit run for pulling conductors, making splices, and performing maintenance. C‑type bodies are commonly installed where a straight run requires an interior access chamber without changing conduit direction.

• Use at pull points, splice locations, or where periodic access is needed
• Suitable for industrial and commercial conduit systems

Material, size, and mounting

This model is die‑cast from a high‑strength aluminum alloy and is furnished in a 1" trade size. The flat back design allows the body to be mounted close to walls or surfaces for a compact installation.

• Material: Die‑cast aluminum
• Trade size: 1"
• Flat back for wall‑close mounting

Connections and threads

The 14132 features tapered threaded hubs intended for NPT threaded conduit connections. The threaded hubs provide a screw‑in mechanical connection to threaded rigid conduit or appropriately threaded adapters.

• Hub type: tapered threaded (NPT)
• Intended to mate with correspondingly threaded conduit or fittings

Installation and accessory guidance

Install the conduit body in the conduit run where access is required, pull conductors through the body, make any splices, and then install a gasketed cover to achieve a rain‑tight closure. The gasketed cover is required for rain‑tight performance; covers and gaskets are sold separately by manufacturers or as specified accessories.

• Mount in the run and complete conductor pulling before permanently closing the cover
• Use a gasketed cover to obtain rain‑tight seal
• Confirm compatible cover/gasket part numbers before ordering

Before You Order

Confirm the model number and quantity required before ordering. Verify the required cover/gasket part number and that 1" NPT threaded connections match the conduit and adapters used in your installation.

• Confirm compatibility with existing conduit thread type and size (1" NPT)
• Order gasketed cover separately if rain‑tight closure is required
• Check local codes and installation practices for conduit fittings

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 14132 Aluminum Rigid Conduit Body C Type, Threaded, 1". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.