EnVision LED-WPROT2-25WS-TRI-BZ – R-Line One Module

Product Overview

The EnVision LED-WPROT2-25WS-TRI-BZ is a single-module R-Line rotating wall pack that delivers 25W and 3,600 lumens with field-selectable color temperature (3000K/4000K/5000K).

This exterior-rated bronze fixture features 360° rotating heads for aiming, 60° optics, a clear acrylic lens with optics, 0–10V dimming capability, and wet-location protection.

Key Features

• Wattage: 25W; light output: 3,600 lm
• Selectable CCT: 3000K / 4000K / 5000K (selection applies to the full fixture)
• Voltage: 120–277V; driver: 0–10V dimmable
• Wet-location rated; IK08 impact rating
• 360° rotating heads with 60° optics; clear acrylic lens with optics
• Die-cast aluminum housing with corrosion-resistant powder coat (bronze standard)
• Built-in 10 kV surge protector (standard); THD <20% (±5% tolerance); PF >0.9
• UL Listed (US/CA), DLC listed (models vary), RoHS compliant; 5-year limited warranty

Purpose and ideal applications

This single-module rotating R-Line wall pack is intended for exterior commercial, multi‑family, and residential applications where adjustable, aimed wall-mounted illumination is needed.

• Common applications: walkways, pathways, parking lot perimeters, outdoor corridors, hospitality and multi‑family exteriors.
• Face-down orientation can meet cut-off (dark-sky) criteria when configured at 3000K.

Performance and optical features

The fixture uses SMD 2835 LEDs to produce 3,600 lumens at 25W and offers a field-selectable CCT (3000K, 4000K, 5000K) that applies to the entire fixture.

• Optics: 60° beam angle with adjustable rotating head providing 360° rotation for aiming.
• Lens: clear acrylic with optics; Color rendering: CRI >80 with R9 >50.
• Rated average life: L70 — 70,000 hours.

Electrical and control details

The standard driver is universal 120–277V with 0–10V dimming. The fixture includes a built-in 10 kV surge protector; driver electrical performance is specified as THD <20% (±5% tolerance) and power factor >0.9.

• Dimming compatibility: 0–10V control. EnVision offers sensor and Bluetooth control options that are compatible with its 0–10V dimmable fixtures; control accessories are ordered separately.
• Available driver options from the manufacturer include HV (277–480V) variants for other models; confirm voltage/driver choice when specifying.

Installation and mounting features

The unit has a die‑cast aluminum housing with corrosion-resistant powder coat. It is designed for wall mounting with multiple wiring knockouts to simplify installation.

• Electrical access: five 1/2" knockouts (including one each side) for conduit/power entry.
• Heads rotate 360° without tools; an optional shield (WPROT-SHIELD) is available and can be mounted forward or rear-facing.

Ratings, certifications and warranty

The model carries common regulatory and performance listings used for commercial specification and can be referenced for rebate or code compliance where applicable.

• UL Listed for USA and Canada; DLC Standard & Premium listing varies by model (DLC ID listed as S-L2Z07B where applicable).
• RoHS compliant; California Title 24 approved; FCC Part 15 Subpart B tested.
• Impact rating IK08; operating temperature range −40°F to 122°F; 5-year limited warranty.

Before You Order

Confirm the exact model number, required quantity, and desired control/driver options before ordering.

• Selectable CCT applies to the full fixture and is set in the field.
• Optional accessories (ordered separately) include WPROT-SHIELD and various sensor/control modules; verify accessory model compatibility when specifying.
• If integrating with site controls or building systems, confirm the required driver voltage and control interface.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for EnVision LED-WPROT2-25WS-TRI-BZ – R-Line One Module. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.