ELCO Lighting 60W 12V Low Voltage Transformer LET-60

Product Overview

ELCO Lighting LET-60 is a low-voltage transformer that provides 60W of output at 12V for powering low-voltage LED fixtures, tape, and modules.

Use the exact SKU LET-60 and listed specifications to verify compatibility with fixture schedules and project power requirements.

Key Features

• 60W output capacity at 12V
• Intended for low-voltage LED lighting applications
• Single SKU: LET-60

What this transformer does

The LET-60 converts line supply to a 12V low-voltage output and supplies up to 60 watts to connected LED fixtures and low-voltage loads.

• Provides a 12V output for compatible LED loads.
• Sized for installations where total connected load does not exceed 60W.

Electrical output and load considerations

Specify the LET-60 only when the combined wattage of all connected fixtures and runs does not exceed 60W and when fixtures require a 12V supply.

• Output voltage: 12V
• Output capacity: 60W (total connected load)

Typical applications

Common uses include powering 12V LED fixtures, tape, and module runs in retrofit and architectural lighting projects, as well as contractor stock for small installations.

• Low-voltage LED fixtures and modules
• LED tape/light strips (verify run lengths and voltage drop separately)
• Retrofit and contractor supply scenarios

Compatibility and installation notes

Confirm the LET-60 model number, the required output voltage, and the total wattage of the connected load prior to installation. Verify any required dimming protocol or control compatibility with the fixture and control manufacturer.

• Match output voltage (12V) and total wattage (≤60W) to the connected load.
• Verify dimming and control compatibility with the fixture and control documentation before installation.
• Confirm model LET-60 when ordering to ensure correct transformer selection.

Before You Order

Confirm the LET-60 model and verify the combined connected load does not exceed 60W and that fixtures require a 12V supply.

• Verify fixture voltage and total wattage before ordering.
• Confirm model and quantity for project purchasing.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting 60W 12V Low Voltage Transformer LET-60. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.