ELCO Lighting E22-2430-100 2.2W per ft 24V LED Tape Light 100 ft Roll

Product Overview

The ELCO Lighting E22-2430-100 is a 100 ft roll of 24V LED tape light rated at 2.2W per foot for linear accent and task lighting such as coves, under-cabinet, millwork and display runs.

Use the SKU (E22-2430-100) and the listed electrical specifications to size drivers and match project requirements.

Key Features

• 2.2W per foot nominal power draw
• 24V DC nominal operating voltage
• Supplied as a 100 ft continuous roll (SKU: E22-2430-100)
• Suitable for cove, under-cabinet, millwork, display and toe-kick lighting

What this tape light is for

The E22-2430-100 is intended for linear accent and task lighting where a low-power continuous LED tape is suitable. Typical placements include coves, under-cabinet illumination, millwork accents, retail displays and toe-kick lighting.

• Common uses: cove lighting, under-cabinet, millwork, display and shelf lighting
• Delivered as a 100 ft roll to support long continuous runs or multiple shorter runs

Electrical and driver requirements

The tape light is specified at 2.2W per foot and is designed to operate from a 24V DC supply. To determine driver capacity, multiply the installed length (feet) by 2.2W/ft and select a 24V driver with at least that wattage rating.

• Nominal power: 2.2 watts per foot
• Nominal voltage: 24V DC
• Size the driver to the total run wattage (length × 2.2W/ft)

Installation and handling notes

Follow standard LED tape handling practices. Cut only at the marked cut points and plan runs so driver location, wire lengths and any required connectors are accounted for. Confirm mounting surface suitability and thermal conditions as part of installation planning.

• Cut only on marked cut points
• Plan driver placement and total run wattage before installation
• Confirm any required mounting accessories, connectors or channel profiles separately

Key specifications

Use these specifications for scheduling and project documentation. Confirm the SKU when ordering to ensure the correct product.

• Brand: ELCO Lighting
• Model / SKU: E22-2430-100
• Product type: LED tape light
• Wattage: 2.2W per foot (nominal)
• Voltage: 24V DC (nominal)
• Package: 100 ft roll

Before You Order

Confirm the exact model number (E22-2430-100) and the total length required for your project; use the wattage per foot to size a compatible 24V driver.

• Verify required total run length and calculate driver wattage: total feet × 2.2W/ft
• Cut only at marked cut points during installation
• Mounting accessories, connectors and drivers are not included and must be sourced separately

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E22-2430-100 2.2W per ft 24V LED Tape Light 100 ft Roll. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.