ELCO Lighting E22-2427-100 2.2W per ft 24V LED Tape Light 100 ft Roll

Product Overview

The ELCO Lighting E22-2427-100 is a 100 ft roll of 24V LED tape light rated at 2.2 watts per foot. It is intended for linear applications such as cove, under‑cabinet, millwork, display accents, and toe‑kick lighting.

This SKU is supplied as a continuous 100 ft roll. Confirm the model number against your fixture schedule and electrical design when specifying or ordering.

Key Features

• 2.2W per foot LED power draw
• 24V nominal operating voltage
• Supplied as a 100 ft roll (SKU E22-2427-100)
• Suitable for cove, under‑cabinet, millwork, display, and architectural linear runs

What this tape light is used for

The ELCO E22-2427-100 is intended for linear lighting where continuous, low‑profile illumination is required. Typical uses include cove lighting, under‑cabinet task lighting, millwork and display accents, shelf illumination, and toe‑kick lighting.

• Continuous 100 ft roll supports long runs and architectural layouts
• Low wattage per foot makes it suitable for accent and task applications

Electrical and driver considerations

This tape light is specified at 2.2 watts per foot and operates on a 24V supply. Drivers must be sized to the total connected wattage for the run and provide the required 24V output.

• Wattage: 2.2W per foot (use total run length × 2.2W to size driver)
• Voltage: 24V nominal — use a compatible 24V LED driver

Installation and field handling

Plan runs and power feeds so they match the tape’s rated voltage and total wattage. Cut the tape only at the manufacturer’s marked cut points. Follow standard low‑voltage wiring practices for voltage drop and feed placement.

• Cut only on marked cut points
• Size driver to total run wattage
• Confirm feed locations to minimize voltage drop on long runs

Product specifications

Reference the table below for the core identification and electrical values provided for this SKU.

• Brand: ELCO Lighting
• Model / SKU: E22-2427-100
• Product type: LED Tape Light
• Wattage: 2.2W per foot
• Voltage: 24V
• Roll length: 100 ft

Before You Order

Confirm the exact model number (E22-2427-100) and quantity required before ordering. Verify driver selection and total run wattage for your design.

• Confirm model/SKU and roll length for project schedules
• Size a 24V LED driver to the total wattage (total feet × 2.2W)
• Plan feed points to limit voltage drop on long runs

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E22-2427-100 2.2W per ft 24V LED Tape Light 100 ft Roll. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.