ELCO Lighting E15-2427-100 LED Tape Light 1.5W/ft 100 ft roll

Product Overview

ELCO Lighting E15-2427-100 is a 100 ft roll of LED tape light specified at 1.5 W per foot for linear accent and task illumination.

This SKU is intended for continuous cove, under‑cabinet, millwork and display lighting where a low‑wattage, evenly distributed linear source is required. Driver sizing must be based on the total run wattage.

Key Features

• 1.5 W per foot power consumption
• Supplied as a 100 ft roll (SKU: E15-2427-100)
• Suitable for cove, under‑cabinet, millwork, shelf and display accent lighting
• Cut only at marked cut points; size the driver to the total run wattage

What this tape light is for

Answer: The ELCO E15-2427-100 is a low‑wattage LED tape light supplied as a 100 ft roll and intended for linear accent and task lighting. Its 1.5 W/ft rating makes it appropriate for cove and under‑cabinet illumination, millwork and display accents, architectural linear runs, and shelf or toe‑kick lighting.

• Cove and under‑cabinet lighting
• Millwork, cabinetry, and display accents
• Architectural linear runs and shelf/toe‑kick illumination

Electrical and driver sizing

Answer: Driver selection must be based on the total wattage of the installed run. Use the 1.5 W/ft specification to calculate required driver capacity and ensure the driver supplies the rated voltage for the tape.

• Power per foot: 1.5 W/ft — multiply by total installed feet to get run wattage
• Size driver to exceed total run wattage with appropriate margin per installer or project standard

Installation and handling notes

Answer: Installers should cut the tape only at the marked cut points and match the listed SKU and specifications to fixture schedules and project requirements.

• Cut only at marked cut points
• Confirm model number (E15-2427-100) when planning runs
• Use appropriate connectors and mounting method as specified by the installation design (manufacturer mounting accessories not specified here)

Key product specifications

Answer: The following verified specification details apply to this exact SKU.

• Brand: ELCO Lighting
• Model / SKU: E15-2427-100
• Product type: LED Tape Light
• Power per foot: 1.5 W/ft
• Length: 100 ft roll

Before You Order

Confirm the model number and quantity required before ordering and size the LED driver to the total run wattage using 1.5 W/ft. Verify any additional installation accessories, mounting profiles or connectors required for your project because those items are not specified with this SKU.

• Confirm SKU: E15-2427-100
• Calculate total run wattage = 1.5 W/ft × total feet
• Ensure chosen driver provides the rated voltage and sufficient wattage margin
• Specify mounting method and connectors as needed (not included)

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E15-2427-100 LED Tape Light 1.5W/ft 100 ft roll. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.