ELCO Lighting E1460-24WW LED Tape Light 4.4W/ft 24V Warm White 16 ft

Product Overview

The ELCO Lighting E1460-24WW is an LED tape light that consumes 4.4 watts per foot and operates on 24V DC. It is intended for linear accent applications such as cove, under‑cabinet, shelf, and millwork lighting.

Use the SKU (E1460-24WW) and the listed electrical requirements when matching the product to fixture schedules and selecting a compatible 24V driver sized to the total run wattage.

Key Features

• 4.4 W/ft power consumption — total run determines driver capacity
• 24V DC operating voltage
• White finish suitable for concealed linear installations
• Model SKU: E1460-24WW

Function and common applications

This LED tape light provides linear accent illumination for interior, concealed installations. Typical uses include cove lighting, under‑cabinet task/ambient lighting, shelf and toe‑kick illumination, millwork accents, and display cases where a continuous line of light is required.

• Cove and indirect ambient lighting
• Under‑cabinet task and accent illumination
• Millwork, displays, and shelving
• Architectural linear runs where a low‑profile light source is needed

Electrical and driver requirements

The E1460-24WW consumes 4.4 watts per foot and runs on 24V DC. Size a 24V LED driver to the calculated total wattage of your assembled run plus an appropriate safety margin.

• Power density: 4.4 W/ft — multiply by run length to determine total wattage
• Voltage: 24V DC — supply must match rated voltage
• Driver sizing: choose a 24V driver with capacity greater than the calculated total wattage

Installation and handling notes

Install the tape light where it will be concealed or diffused as needed for the desired visual effect. Follow standard tape‑light practices for mounting, cutting, and wiring.

• Cut only at the marked cut points on the tape
• Mount to a clean, dry surface using recommended adhesive or channels (verify compatibility before installation)
• Observe polarity when connecting to a 24V driver

Specifications

Reference the following SKU‑specific specifications when specifying or ordering. Confirm model number and required quantities before purchase.

• Brand: ELCO Lighting
• Model / SKU: E1460-24WW
• Product type: LED Tape Light
• Power per foot: 4.4 W/ft
• Voltage: 24V
• Finish: White

Before You Order

Confirm the exact model number (E1460-24WW) and size the 24V driver to the total run wattage (4.4 W/ft × run length). Verify mounting surface compatibility and required diffusers or channels for your installation.

• Confirm SKU: E1460-24WW
• Calculate total wattage: 4.4 W/ft × run length
• Select a compatible 24V driver sized above the calculated wattage
• Cut only at marked cut points; confirm mounting surface compatibility

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E1460-24WW LED Tape Light 4.4W/ft 24V Warm White 16 ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.