Dottie 1/2 in x 6-1/4 in SDS 4 Plus Rotary Hammer Drill Bit SDS12614

Product Overview

The Dottie SDS 4 Plus Rotary Hammer Drill Bit, model SDS12614, is a 1/2 in x 6-1/4 in SDS-format masonry bit intended for electrical installation and service work where that size and format are required.

This SKU is identified by manufacturer part number SDS12614 and UPC 00781002122203 for purchase-order and inventory matching.

Key Features

• Manufacturer part number: SDS12614 for accurate ordering and stock lists
• Format/size: 1/2 in diameter × 6-1/4 in length (SDS 4 Plus rotary-hammer style)
• UPC: 00781002122203 for barcode-based receiving and procurement
• Unit of measure: Each (Ea); standard quantity: 1
• Dottie category: SDS Drill Bits — intended for electrical accessories/installation parts

What this drill bit is for

Answer: The Dottie SDS12614 is a rotary hammer masonry bit in SDS 4 Plus format sized 1/2 in × 6-1/4 in. It is supplied for electrical installation and service drilling tasks that require that diameter and length.

• Intended uses listed: electrical installation tool work, service and repair tasks, conduit/box/fastener preparation, contractor tool stock

Size and format

Answer: Confirmed physical format and dimensions are 1/2 inch diameter by 6-1/4 inches length in an SDS 4 Plus rotary-hammer style.

• SDS connection type: SDS 4 Plus (as cataloged)
• Size/Format label: 1/2 in x 6-1/4 in

Applications and typical tasks

Answer: This bit is cataloged for typical electrical-trade tasks requiring masonry or concrete drilling in the listed size.

• Conduit and box mounting preparation
• Drilling for fastener installation in masonry substrates
• Service and repair drilling where 1/2 in holes are specified

Ordering and catalog identifiers

Answer: Use the manufacturer part number and UPC to match procurement, receiving, and stock records.

• Manufacturer part number (SKU): SDS12614
• UPC: 00781002122203
• Unit of measure: Each (Ea); standard quantity per unit: 1

Compatibility and installation notes

Answer: Confirm tool and jobsite requirements before purchase and use.

• Verify the Dottie part number and SDS 4 Plus connection type match your rotary hammer tool
• Confirm the 1/2 in × 6-1/4 in size is appropriate for the target material and fastener/conduit requirements
• Follow the tool manufacturer's guidance and safe work practices when installing or using this drill bit

Before You Order

Confirm the model number, SDS connection type, and the 1/2 in x 6-1/4 in size meet your tool and job requirements before ordering.

• Verify compatibility with your rotary hammer tool (SDS 4 Plus connection)
• Confirm drill diameter and length are appropriate for the target material and fastener/conduit
• If ordering for contractor stock or procurement lists, match SDS12614 and UPC 00781002122203 for accurate receiving

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Dottie 1/2 in x 6-1/4 in SDS 4 Plus Rotary Hammer Drill Bit SDS12614. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.