Diode LED Tape Light Fastener - 10 Clips, 20 Screws (DI-WM-TF)

Product Overview

The Diode LED DI-WM-TF is a 10‑pack of white tape light fasteners molded from polyamide 66 (PA66) for indoor use. Each clip is sized to retain LED tape up to 0.4 in. (10 mm) wide.

Packs include mechanical mounting screws as specified by the manufacturer and are intended to secure low‑voltage LED tape in interior applications such as under‑cabinet, cove, and display lighting.

Key Features

• Pack of 10 white tape light fasteners (DI-WM-TF) molded in polyamide 66 (PA66)
• Rated to retain LED tape up to 0.4 in. / 10 mm wide
• Intended for indoor installations
• Includes zinc screws per manufacturer specification for mechanical mounting
• Compact dimensions: 0.87 x 0.2 x 0.1 in. (L x W x H) per fastener

What this fastener does

The DI-WM-TF clip provides mechanical retention for low‑voltage LED tape in indoor lighting installations. It is sized to retain LED tape with a maximum width of 0.4 in. (10 mm). Each pack contains ten clips for use at multiple attachment points along a tape run.

• Purpose: mechanical retention of LED tape in interior installations
• Clip material: polyamide 66 (PA66), white finish

Dimensions and material

Use the published dimensions and material to confirm fit in channels, raceways, or millwork details where the clip will be installed.

• Clip dimensions: 0.87 in. (L) x 0.2 in. (W) x 0.1 in. (H) per fastener
• Color: white
• Material: Polyamide 66 (PA66)

Mounting method and included hardware

The DI-WM-TF is supplied with zinc screws per the manufacturer specification for mechanical attachment to typical interior substrates.

• Mounting: mechanical using zinc screws as specified by the manufacturer
• Adhesive mounting is not listed for this model in the manufacturer specification

Typical applications

These clips are intended for indoor LED tape installations where positive mechanical retention is required.

• Under‑cabinet and shelf task lighting
• Cove and millwork accent lighting
• Display and retail lighting

Before You Order

Verify the tape light width (maximum 0.4 in. / 10 mm) and that screw mounting is appropriate for your installation substrate.

• Intended for indoor use only
• If adhesive mounting is required, consider other Diode LED wire‑management clips that include 3M™ double adhesive tape

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Tape Light Fastener - 10 Clips, 20 Screws (DI-WM-TF). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.