Diode LED Tape Light Terminal Block, 8mm, Jumper Cable (Tape to Tape), 6 in 20 AWG Wire Lead, White (DI-TB8-6JPR-TTT-1)

Product Overview

The Diode LED DI-TB8-6JPR-TTT-1 is a tape-to-tape jumper connector for 8mm LED tape. It has a 6-inch lead made with 20 AWG wire.

Its screw-down terminals secure the tape connections. The compact connector fits shallow channels and tight corners in indoor, low-voltage tape-light installations.

Key Features

• Tape-to-tape connection for 8mm LED tape
• 6-inch jumper cable with 20 AWG wire lead
• Screw-down terminals
• Clear casing designed to support a nearly seamless light line between connections

Connect Two Lengths of 8mm LED Tape

This SKU makes a tape-to-tape connection between 8mm LED tape sections. Its compact body can fit in shallow channels and tight corners, including tape-light returns.

6-Inch Jumper Lead and Screw-Down Terminals

The connector has a 6-inch, 20 AWG wire lead and screw-down terminals for the tape connection. Its clear casing is designed to support a nearly seamless light line between connections.

Electrical and Installation Requirements

The connector is specified for 12–24 VDC operation, with a maximum amperage of 5A at 12V or 4A at 24V. Install it with a Class 2 DC constant-voltage LED driver and follow applicable national and local electrical codes.

• Intended for indoor use.
• Specified ambient temperature range: -4°F to 122°F (-20°C to 50°C).
• The manufacturer specifies installation and service by a qualified, licensed electrician.

Before You Order

Confirm that your LED tape is 8mm wide and that a 6-inch tape-to-tape jumper suits your layout.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Tape Light Terminal Block, 8mm, Jumper Cable (Tape to Tape), 6 in 20 AWG Wire Lead, White (DI-TB8-6JPR-TTT-1). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.