Diode LED TAPEGUARD 14mm Tape Light Cover - Frosted - Single (Fits up to 14mm tape) (DI-TAPE-GRD14-FR)

Product Overview

The Diode LED DI-TAPE-GRD14-FR is an aluminum LED channel housing with a frosted lens designed to hold and diffuse low-voltage LED tape light into a continuous line of light.

Cut-to-length aluminum extrusion intended for custom cabinet, cove, shelf, and millwork installations; pairs with matching lenses, end caps, and mounting clips in the same channel series.

Key Features

• Frosted lens that reduces visible LED dotting for a continuous linear appearance
• Aluminum body that provides mechanical protection and serves as a heat-dissipating extrusion
• Cut-to-length extrusion for fitting custom cabinet, cove, display, and millwork dimensions
• Compatible with matching Diode LED lenses, end caps, and mounting clips in the same channel series

What this channel does

The DI-TAPE-GRD14-FR houses low-voltage LED tape and uses a frosted lens to blend individual LED points into a more continuous line of light. It provides a finished appearance for linear lighting runs and conceals the tape within an aluminum extrusion.

• Diffuses LED point sources into a smoother linear appearance
• Conceals and protects LED tape for cleaner millwork and cabinet installs

Where to use it

Typical interior applications include locations where a low-profile, finished linear lighting appearance is desired.

• Under-cabinet and above-cabinet lighting
• Cove, toe-kick, and perimeter lighting
• Shelf, display, and millwork edge lighting

Tape compatibility and sizing

The channel is sized to accept LED tape up to 14mm wide. Confirm tape width before ordering and installing.

• Accepts LED tape up to 14mm wide
• Cut-to-length extrusion — plan cuts to fit installation dimensions

Materials and construction

Constructed from aluminum with a frosted lens, the channel combines mechanical protection with the thermal mass characteristics of aluminum extrusions.

• Material: Aluminum body
• Lens type: Frosted

Ordering and planning notes

Confirm required lengths, quantities, and any matching end caps or mounting clips needed for installation before ordering.

• Pairs with matching Diode LED lenses, end caps, and mounting clips in the same channel series
• Verify required lengths and quantity prior to ordering

Before You Order

Confirm your LED tape width fits (14mm or narrower) and plan cuts to the cut-to-length extrusion.

• Verify LED tape is 14mm wide or narrower
• Determine required lengths and quantities before ordering

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED TAPEGUARD 14mm Tape Light Cover - Frosted - Single (Fits up to 14mm tape) (DI-TAPE-GRD14-FR). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.