Diode LED TOUCHDIAL Color Control System - Tunable White 4-Zone Remote Controller (DI-RF-REM-TW-4)

Product Overview

The Diode LED DI-RF-REM-TW-4 is an RF Wireless remote controller for low-voltage tunable-white LED lighting systems. It provides wireless zone-based white-temperature adjustment and scene control across four zones.

Verify that the RF Wireless protocol and operating voltage of this controller match your LED drivers and loads before wiring and installation.

Key Features

• RF Wireless control for integration with compatible RF control networks
• Supports tunable-white (CCT) adjustment and dimming for low-voltage LED loads
• 4 independent zones for separate runs or scene groups
• Designed for low-voltage LED lighting systems

What this controller does

The DI-RF-REM-TW-4 delivers RF Wireless remote control for low-voltage tunable-white LED lighting, enabling adjustment of color temperature (white tuning), dimming, and scene control across four zones.

• Wireless control of tunable-white LED loads
• Four-zone control for independent runs or scenes
• Intended to operate within compatible RF Wireless control systems

Compatibility and wiring checklist

This controller communicates via an RF Wireless protocol and is intended for low-voltage LED systems. Confirm that your LED drivers and fixtures support the same RF protocol and the required operating voltage before wiring.

• Confirm RF Wireless protocol compatibility between controller and drivers
• Confirm controller operating voltage matches your LED drivers/loads
• Intended for low-voltage tunable-white (TW) LED systems

Typical applications

Use this controller where wireless tunable-white control and zoning are required. It is suitable for architectural accent lighting, scene control, retail displays, and residential tunable-white installations when used with compatible drivers and loads.

• Tunable-white and white-temperature control
• Architectural and scene lighting
• Commercial and residential low-voltage LED installations

Zones and control layout

The unit provides four independent zones so installers can assign separate tape or fixture runs to individual zones for independent white-tuning and scene control. Zone assignment and system setup occur during installation/configuration.

• 4 independent zones
• Use zoning to separate circuits, create scenes, or group fixtures by area

Before You Order

Verify RF Wireless protocol and operating voltage compatibility with your LED drivers and loads before ordering.

• Confirm RF Wireless protocol matches your control network
• Confirm operating voltage compatibility with drivers/loads

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED TOUCHDIAL Color Control System - Tunable White 4-Zone Remote Controller (DI-RF-REM-TW-4). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.