Diode LED Magnetic Low Voltage (MLV) Dimmable Driver 12V, 60W (DI-MLV-12V60W)

Product Overview

The Diode LED DI-MLV-12V60W is a 60 W, 12 VDC constant-voltage magnetic dimmable driver for low-voltage LED tape and fixtures.

It is a Class 2 driver with internal primary and secondary auto-reset protection, terminal input/output connections, NEMA 3R environment rating, and a 5-year limited warranty.

Key Features

• 12 VDC constant-voltage output for LED tape and fixtures
• 60 W maximum load (DI-MLV-12V60W)
• Magnetic dimmable (compatible with many common MLV/ELV dimmers per manufacturer recommendations)
• Primary and secondary auto-reset protection
• Class 2 output and NEMA 3R environment rating
• Terminal-style input and output connections
• 5-year limited warranty

What this driver does

The DI-MLV-12V60W delivers a regulated 12 VDC constant-voltage output rated up to 60 W to power low-voltage LED tape and compatible fixtures.

• Provides stable low-voltage power for LED tape and fixtures
• Each maximum run requires a dedicated feed from the driver (manufacturer guidance)

Dimming and controls compatibility

This magnetic dimmable driver is intended for use with many common MLV/ELV dimmers. The manufacturer lists several recommended dimmer families and models.

• Manufacturer-recommended dimmers include select Lutron, Leviton, and Legrand models (see manufacturer documentation for specifics)
• Designed for magnetic/low-voltage dimming

Electrical ratings and protection

Use the driver within its electrical limits and follow manufacturer installation guidance.

• Output: 12 VDC constant voltage
• Maximum load: 60 W
• Internal protection: primary and secondary auto-reset
• Class 2 output

Mounting, connections, and environment

Follow the manufacturer's mechanical and safety guidance for mounting and wiring.

• Input and output: terminal connections
• Environment rating: NEMA 3R (indoor/damp locations indicated by manufacturer)
• Mounting orientation: manufacturer specifies vertical mounting; do not mount horizontally or upside down (warranty may be affected)
• Install in accordance with national and local electrical codes

Before You Order

Confirm the model and that the total connected load does not exceed 60 W at 12 VDC.

• Installation must comply with national and local electrical codes and be performed by a qualified, licensed electrician
• Use copper wiring rated for at least 176°F (80°C) and sized to avoid excessive voltage drop
• Mount the driver vertically as required by the manufacturer

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Magnetic Low Voltage (MLV) Dimmable Driver 12V, 60W (DI-MLV-12V60W). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.