Diode LED Mounting Clips - 2 Clips, 4 Screws (DI-CPMC2-SCR4)

Product Overview

The Diode LED DI-CPMC2-SCR4 is a package of two aluminum mounting clips supplied with four screws for attaching compatible Diode LED aluminum LED channels.

The clips are intended to secure channel extrusions used to house low-voltage LED tape and are designed to pair with matching lenses, end caps, and accessories from the same Diode LED channel series.

Key Features

• Aluminum clips for mounting Diode LED channel extrusions.
• Includes (2) clips and (4) screws.
• Not compatible with CHROMAPATH SLIM aluminum channel.
• Designed to work with channels that are cut to fit custom cabinet and casework dimensions.

What these clips do

Direct answer: The DI-CPMC2-SCR4 provides a method to mount compatible Diode LED aluminum channel extrusions to cabinets, millwork, or other substrates using the supplied clips and screws.

The clips secure channel extrusions that are used to house low-voltage LED tape and to accept matching lenses and end caps from the same channel family.

• Supplied parts: (2) clips and (4) screws.
• Intended to fasten channel extrusions so the channel can be finished with matching accessories.

Compatibility and fit

Direct answer: These clips are intended for use with the matching Diode LED channel series and accessories and are explicitly not compatible with CHROMAPATH SLIM aluminum channel.

Confirm the channel series and that the LED tape width fits the channel opening before ordering to ensure proper fit.

• Not compatible with CHROMAPATH SLIM Aluminum Channel.
• Pairs with Diode LED lenses, end caps, and other accessories from the same channel family.

Recommended applications

Direct answer: These clips are suitable for typical linear LED channel installations used in concealed and accent lighting where a finished aluminum channel is desired.

Common uses include under-cabinet, cove, display, and millwork edge lighting when paired with appropriate channel and LED tape.

• Under-cabinet and above-cabinet accent lighting
• Cove, toe-kick, and perimeter lighting
• Shelf, display, and millwork edge lighting

Installation and planning notes

Direct answer: Confirm LED tape width fits the channel opening and plan channel cuts to the required length before mounting; the clips secure the channel after it is cut and positioned.

The package includes the clips and screws shown; additional hardware requirements depend on the chosen channel and mounting substrate and are not included here.

• Confirm LED tape width fits the channel opening before mounting.
• Plan channel cut lengths before installing clips.
• Verify channel series and accessory compatibility to ensure correct assembly.

Before You Order

Verify the intended Diode LED channel series and confirm the LED tape width fits the channel opening before ordering.

• These clips are not compatible with CHROMAPATH SLIM Aluminum Channel.
• Confirm required quantity and channel accessory needs (lenses, end caps) prior to purchase.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Mounting Clips - 2 Clips, 4 Screws (DI-CPMC2-SCR4). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.