Diode LED CLICKTIGHT Splice Connector: UB/VA - White, 48 in, 2464 wire (DI-CKT-48SP10)

Product Overview

The Diode LED DI-CKT-48SP10 is a 48-inch CLICKTIGHT splice connector for connecting compatible LED tape light directly to a hard-wired connection. It has a 10mm connector and a UL 2464 20/2 AWG wire lead.

This white connector is specified for ULTRA BLAZE, VALENT, and VALENT HD tape light. Its dimensions are 48 × 0.55 × 0.20 inches (length × width × height).

Key Features

• 48-inch CLICKTIGHT splice connector for a hard-wired connection
• 10mm connector for ULTRA BLAZE, VALENT, and VALENT HD tape light
• UL 2464 20/2 AWG wire lead
• White finish

What the DI-CKT-48SP10 connector does

The DI-CKT-48SP10 is a CLICKTIGHT splice connector that attaches compatible tape light directly to a hard-wired connection. It has a 48-inch lead.

Compatible tape light

This 10mm CLICKTIGHT splice connector is specified for Diode LED ULTRA BLAZE, VALENT, and VALENT HD tape light. Check your tape light model when selecting a connector.

Wire lead and dimensions

The connector has a UL 2464 20/2 AWG wire lead and measures 48 × 0.55 × 0.20 inches (length × width × height). It is white.

Before You Order

Check tape light compatibility and connection type; this accessory is intended for indoor, dry environments and is not rated for in-wall installation.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED CLICKTIGHT Splice Connector: UB/VA - White, 48 in, 2464 wire (DI-CKT-48SP10). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.