Diode LED BLAZE X 200 LED Tape Light, 24V, 2400K, 100 ft. Spool (DI-24V-BLX2-24-100)

Product Overview

The Diode LED DI-24V-BLX2-24-100 is a 100 ft. spool of 24VDC LED tape intended for interior task, accent, and display lighting. It delivers 226 lumens per foot at 2400K with a CRI of 95+ and consumes 3.1 W/ft.

The tape has 2 in. cut intervals, supports single runs up to 45 ft, is dimmable, uses Epistar 2835 Guang Mau LEDs, has a 120° beam angle, and is UL Listed to 2108 for indoor/damp locations.

Key Features

• 226 lm/ft at 2400K with 95+ CRI
• 3.1 W per foot on a 24VDC constant‑voltage platform
• Cut points every 2 in.
• Single runs up to 45 ft
• Dimmable; UL Listed 2108; rated for indoor/damp locations
• Supplied as a 100 ft. spool

What this tape light is for

Direct answer: The DI-24V-BLX2-24-100 is designed for interior task, accent, and display lighting where a warm 2400K appearance and high color fidelity are desired.

• Typical uses: under‑cabinet and shelf task lighting, cove and millwork accent, display and retail lighting, and other indoor/damp linear lighting applications.
• Packaged as a 100 ft. spool for long continuous lengths or multiple segmented runs.

Light output and color performance

Direct answer: The tape produces 226 lumens per foot at 2400K with a CRI of 95+, intended for accurate color rendering in close‑view applications.

• LED type: Epistar 2835 Guang Mau (as specified).
• Beam angle: 120° for broad distribution along the run.

Voltage, wattage and driver requirements

Direct answer: The product operates on a 24VDC constant‑voltage system and draws 3.1 W/ft.

• Use the 3.1 W/ft rating to calculate total wattage for your required length and select a 24VDC constant‑voltage driver sized above that total wattage.
• Dimmable: the tape is listed as dimmable; use a compatible 24V dimming driver or controller as required by your system.

Cut points, max run and physical size

Direct answer: The tape has 2 in. cut intervals and supports single continuous runs up to 45 ft.

• Cut interval: every 2 in.
• Maximum recommended single run: 45 ft — plan power feeds accordingly for longer installations.
• Dimensions: width 0.32 in and height 0.1 in, suitable for many trim channels and shallow mounting locations.

Location rating and certifications

Direct answer: The tape is rated for indoor and damp locations and is UL Listed to standard 2108.

• Location rating: Indoor / Damp Location.
• Certification: UL Listed 2108.

Before You Order

Verify required linear footage and confirm the model number before ordering.

• Calculate driver capacity using 3.1 W per foot × the number of feet used and select a 24VDC constant‑voltage driver sized above that total.
• Keep continuous runs to 45 ft or less per the product specification; plan additional power feeds for longer installations.
• Intended for indoor and damp locations only.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE X 200 LED Tape Light, 24V, 2400K, 100 ft. Spool (DI-24V-BLX2-24-100). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.