Diode LED CLICKTIGHT Bending Extension: DRGB, 12 in (DI-1091)

Product Overview

The Diode LED DI-1091 is a 12 in CLICKTIGHT flexible extension cable for low-voltage RGB tape light systems. It provides a factory-made lead to join tape sections, connect tape to controllers or drivers, and route power without field splicing.

Rated for Class 2 low-voltage systems at 12–24V DC and sized to assist with run-to-run spacing and turns where a flexible lead is required.

Key Features

• 12 in flexible extension for routing between runs or around corners
• Compatible with 12–24V DC Class 2 LED systems
• CLICKTIGHT-style flexible wire lead for RGB tape connections
• Approximate dimensions: 12" L × 0.55" W × 0.20" H

What this cable does

The DI-1091 is a factory-made RGB flexible extension (CLICKTIGHT-style) used to attach and space LED tape runs, connect tape to controllers or drivers, and route power around corners without cutting and splicing field wiring.

• Use to extend LED tape and fixture runs up to the provided 12 in length
• Distribute power between tape runs and components where a short flexible lead is needed
• Intended for interior, low-voltage Class 2 LED connections

Voltage and Class 2 rating

The DI-1091 is intended for use in Class 2 low-voltage LED systems and is compatible with 12V and 24V DC tape-light installations when used with appropriate drivers and controllers.

• Suitable for 12V and 24V constant-voltage systems within Class 2 limits
• Refer to driver and tape specifications for system ampacity and load guidance

Compatibility and connector notes

This accessory is part of Diode LED’s tape connector/accessory family and is intended to mate with matching RGB tape, controllers, and driver leads. Confirm connector type and polarity match your tape and driver before ordering or installing.

• Designed to be used with Diode LED RGB/DRGB tape and related CLICKTIGHT connectors
• Verify polarity and wiring scheme (RGB leads) to avoid crossed connections

Size and physical fit

The DI-1091 provides a compact, flexible 12 in lead that fits typical tape-light installation routing requirements and tight-turn applications.

• Length: 12 in
• Approximate overall dimensions: 12" L × 0.55" W × 0.20" H

Before You Order

Confirm the connector type and polarity match your LED tape, driver, and controller before ordering.

• Verify 12V vs 24V system compatibility and Class 2 driver requirements
• Check that the 12 in lead length meets routing and enclosure constraints
• Confirm required quantity (each listing is for one DI-1091 cable)

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED CLICKTIGHT Bending Extension: DRGB, 12 in (DI-1091). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.