Diode LED Wet Location Extension Cable (9mm Plugs) - Male to Female, 12 in (DI-0758)

Product Overview

The Diode LED DI-0758 is a 12 in low-voltage extension cable with 9mm male-to-female plugs, rated for wet locations to connect compatible LED tape, fixtures, and drivers.

Supplied as a pre-assembled plug-in extension, the DI-0758 is intended for short run-to-run spacing where a wet-location rated connector is required.

Key Features

• Wet-location rated for damp and outdoor connections
• 12 in length for short run-to-run extensions
• Male-to-female 9mm plug connection
• Pre-assembled plug-in extension for low-voltage LED systems

What this cable does

The DI-0758 is a pre-assembled 12 in low-voltage extension cable with 9mm male and female plugs. It is intended to extend LED tape and fixture runs and to connect compatible drivers to remote runs without custom wiring.

• Extends LED tape and fixture runs by 12 inches
• Provides a plug-in connection between compatible low-voltage components
• Supplied pre-assembled to avoid field splicing for short distances

Where to use it

The DI-0758 is rated for wet locations and may be used where a wet-location low-voltage connector is required, such as between runs of LED tape or between a driver and branch runs. Confirm compatibility with the specific tape, fixture, and driver before use.

• Suitable for wet and damp-location low-voltage connections
• Intended for short run-to-run spacing and power distribution between compatible components

Length and connector notes

Cable length is 12 in. The product uses 9mm male and female plugs. Confirm that the connector type and polarity match your LED tape, fixtures, and driver before ordering.

• Length: 12 in
• Connector: 9mm male to 9mm female
• Confirm polarity and connector compatibility with your LED components

Installation considerations

Install the DI-0758 as a plug-in extension between compatible connectors. Do not modify the factory connectors; confirm fit and polarity prior to making connections.

• Fully engage plug connections to ensure contact
• Use for plug-to-plug extension in short runs; not intended as an in-line splice

Before You Order

Confirm the DI-0758 model number, 9mm connector type, and polarity match your LED tape, fixtures, and driver before ordering.

• Verify connector compatibility and polarity
• Confirm the 12 in length meets your run-to-run spacing needs

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Wet Location Extension Cable (9mm Plugs) - Male to Female, 12 in (DI-0758). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.