ABBA Lighting TSDCT 24100 100W Landscape Transformer

Product Overview

The ABBA Lighting TSDCT 24100 is a 100W landscape transformer that provides 24V DC output for low‑voltage lighting circuits. It includes a built‑in photocell and digital timer and is housed in a heavy‑duty ABS plastic enclosure with an IP65 rating.

Designed for landscape lighting installations, the TSDCT 24100 suits path, spot, and well‑light circuits; size the transformer above the connected load and confirm run length and wire gauge before installation.

Key Features

• 100W output (24V DC) for low‑voltage landscape lighting
• Heavy‑duty ABS plastic housing
• Built‑in photocell and digital timer for automatic dusk‑to‑dawn operation
• Outdoor‑rated enclosure with IP65 waterproof rating
• Single SKU: TSDCT 24100

What this transformer does

The TSDCT 24100 supplies 24V DC at up to 100 watts to low‑voltage landscape lighting circuits. It converts line power to a 24V DC output intended to feed multiple fixtures on the same run, such as path lights, spotlights, and well lights.

• Output: 24V DC
• Maximum power: 100W

Recommended applications

This transformer is intended for landscape lighting systems that require a 24V DC source and up to 100W of combined fixture load. Typical uses include powering small-to-midsize runs of path, spot, and well lights in residential or commercial landscapes.

• Powering low‑voltage landscape fixtures
• Feeding multiple fixtures on a single circuit (confirm cumulative wattage)
• Suitable for new installations, upgrades, and contractor maintenance work

Electrical output and sizing guidance

Select the TSDCT 24100 only when its 100W, 24V DC output meets or exceeds the total wattage of the fixtures on the circuit. Before installation, verify fixture wattage, run length, and wire gauge so voltage drop is acceptable for your layout.

• Size the transformer above the connected load (do not exceed 100W total)
• Confirm wire gauge and run length to prevent excess voltage drop
• Match the required output voltage of fixtures (24V DC)

Built‑in controls

The unit includes a built‑in photocell and a digital timer to provide automatic dusk‑to‑dawn operation and scheduling. Use those features to automate lighting without adding separate control accessories.

• Photocell enables automatic dusk-to-dawn switching
• Digital timer provides scheduled control (see installer settings)

Enclosure and environmental rating

The transformer is housed in a heavy‑duty ABS plastic enclosure and carries an IP65 waterproof rating, making it suitable for outdoor installation where ingress protection is required. Follow local codes and installation best practices for mounting and wiring in wet locations.

• Body material: heavy‑duty ABS plastic
• Ingress protection: IP65 (waterproof rating)

Before You Order

Confirm the model number and quantity required before ordering. Verify that your fixtures require 24V DC and that their combined wattage does not exceed 100W. Check run lengths and wire gauge to ensure acceptable voltage drop for your installation.

• Confirm fixture voltage requirement: 24V DC
• Do not exceed 100W total connected load
• Confirm wire gauge and run length for voltage drop considerations

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ABBA Lighting TSDCT 24100 100W Landscape Transformer. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.