ABBA Lighting TSDCS60 60W Landscape Transformer

Product Overview

The ABBA Lighting TSDCS60 is a 60W, 12V constant-voltage landscape transformer designed for low-voltage outdoor lighting circuits. It uses a commercial-grade plastic enclosure and is dimmable and ETL certified.

Intended for powering 12V LED landscape fixtures such as path lights, spot lights and well lights; size the transformer above the connected load and confirm run lengths and wire gauge before installation.

Key Features

• 60W output at 12V DC (constant voltage)
• Commercial-grade plastic enclosure suitable for outdoor-rated transformer installation
• Dimmable output
• ETL Certified

Primary function

The ABBA Lighting TSDCS60 provides 60 watts of 12V constant-voltage power for low-voltage landscape lighting circuits. It is intended to supply runs of 12V LED or other 12V fixtures requiring a steady 12-volt source.

Compatible applications

Use the TSDCS60 where a single 12V, 60W supply is appropriate. Typical applications include powering path lights, spot/area fixtures, well lights, and LED strip or tape runs that require constant 12V input.

• Powering 12V LED landscape lighting runs
• Feeding path, spot, and well-light circuits
• Supplying low-voltage strip/tape lighting in outdoor-rated installations

Electrical output and sizing

This transformer delivers a constant-voltage 12V DC output with a maximum capacity of 60 watts. Size the transformer at or above the total wattage of the connected fixtures and include margin for any future additions or inrush characteristics of specific fixtures.

• Output: 12V DC, constant voltage
• Maximum wattage: 60W

Installation and compatibility notes

The TSDCS60 is housed in a commercial-grade plastic enclosure intended for outdoor-rated transformer installation. It is dimmable and ETL certified. Confirm the model number, match the transformer's 12V output to your fixtures, and verify wire gauge and run length prior to wiring to avoid voltage drop or overload.

• Confirm transformer wattage is greater than the total connected load
• Verify run lengths and wire gauge to prevent excessive voltage drop
• Match output voltage and any zone or timer requirements to fixture needs

Before You Order

Confirm the model number and quantity required before ordering. Verify total fixture wattage, wire gauge and run lengths to ensure the TSDCS60 is the correct capacity for your installation.

• Confirm connected load does not exceed 60W (allow margin for future additions)
• Verify fixture voltage compatibility (12V DC)
• Check run length and wire gauge to avoid voltage drop

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ABBA Lighting TSDCS60 60W Landscape Transformer. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.