ADPTPRO-DRJ-192-24 Adaptive PRO Driver with Enclosed Leads and Knockouts 192 Watts 24V DC

Product Overview

The ADPTPRO-DRJ-192-24 is a 192-watt constant-voltage driver that delivers 24 V DC output. It includes enclosed leads and conduit knockouts for wiring convenience and is finished in black.

Form factor and basic dimensions: 10.9" (length) × 4.33" (width) × 1.88" (height). Sold as a single unit under SKU ADPTPRO-DRJ-192-24.

Key Features

• Constant-voltage driver — 24 V DC output
• 192 watts total power capacity
• Enclosed leads and integrated knockouts for wiring/junction access
• Black finish
• Compact rectangular housing with listed length, width, and height

Function and purpose

The ADPTPRO-DRJ-192-24 is a constant-voltage power driver designed to supply 24 V DC to compatible LED fixtures and low-voltage lighting systems. It provides a total output capacity of 192 watts for use where a single high-capacity 24 V driver is required.

Electrical output and capacity

This model supplies 24 V DC at a combined maximum of 192 watts. Use the driver when the total connected load does not exceed the rated wattage.

• Output voltage: 24 V DC
• Total power: 192 W

Dimensions and finish

Confirm physical fit and aesthetics in the installation location using the published dimensions and finish.

• Length: 10.9 inches
• Width: 4.33 inches
• Height: 1.88 inches
• Finish: Black

Wiring, enclosed leads and knockouts

The driver includes enclosed leads and integrated knockouts to facilitate junctions and wiring runs. These features are intended to simplify installation and provide a tidy wiring solution.

• Enclosed leads for protected conductor routing
• Knockouts provided for junction access

Ordering notes

Confirm the model number and quantity required before ordering to ensure compatibility with your lighting fixtures and system layout.

• SKU / Part Number: ADPTPRO-DRJ-192-24
• Sold as: Each

Before You Order

Confirm that your LED fixtures or low-voltage devices are compatible with a 24 V DC constant-voltage driver and that their combined wattage does not exceed 192 W.

• Verify model number ADPTPRO-DRJ-192-24 and required quantity before purchase.
• Confirm wiring method and knockout locations meet your installation needs.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ADPTPRO-DRJ-192-24 Adaptive PRO Driver with Enclosed Leads and Knockouts 192 Watts 24V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.