ADPT-DRJ-96-24 Adaptive Driver with Enclosed Leads and Knockouts 96 Watts 24V DC

Product Overview

The ADPT-DRJ-96-24 is a 96-watt, 24V DC adaptive constant-voltage driver in a black enclosure with pre-attached leads and conduit knockouts for junction wiring.

Designed for low-voltage LED installations that require a phase-cut compatible constant-voltage supply, this driver provides a compact, enclosed power solution sized 8.66" long × 3.54" wide × 1.61" high.

Key Features

• Output: 24 V DC constant-voltage, 96 watts total
• Enclosed black housing with integrated leads and knockouts for junction connections
• Phase-cut compatible (phase cut constant voltage)
• Compact footprint: 8.66" L × 3.54" W × 1.61" H
• Sold as single unit — SKU ADPT-DRJ-96-24

What this driver does

The ADPT-DRJ-96-24 is a constant-voltage driver that supplies 24 V DC up to a total of 96 watts. It is intended to power 24V DC LED loads requiring a stable constant-voltage source and supports phase-cut control compatibility as indicated by the product description.

• Constant-voltage output: 24 V DC
• Total output power: 96 W
• Phase-cut compatible (phase cut constant voltage)

Size, enclosure and connection features

The unit ships in a black enclosed housing sized for compact installations and includes enclosed leads plus knockouts to facilitate junction wiring and conduit entry without requiring a separate junction box.

• Finish: Black
• Dimensions: 8.66" (length) × 3.54" (width) × 1.61" (height)
• Enclosed leads and integrated knockouts for wiring access

Electrical output and compatibility notes

The driver provides a 24V DC constant-voltage output rated at 96 watts. The product description specifies phase-cut constant-voltage operation. Confirm compatibility of your LED fixtures and any dimming/control systems with a 24V constant-voltage, phase-cut driver before installation.

• Output voltage: 24 V DC
• Rated power: 96 W
• Phase-cut constant-voltage operation — verify controller compatibility with phase-cut dimming if dimming is required

Ordering and verification

This listing is for a single ADPT-DRJ-96-24 driver (SKU ADPT-DRJ-96-24). Confirm the model number and quantity required for your project and verify that 24V DC, 96W capacity meets your load and control requirements prior to purchase.

• SKU / Part Number: ADPT-DRJ-96-24
• Sold as: Each

Before You Order

Confirm the ADPT-DRJ-96-24 model number and that a 24V DC, 96W constant-voltage driver with phase-cut compatibility is appropriate for your LED fixtures and control method before ordering.

• Verify fixture input voltage and total load do not exceed 96 W.
• Confirm phase-cut dimming/control compatibility with your dimmer or controller.
• Check physical dimensions and knockout placement for your installation location.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ADPT-DRJ-96-24 Adaptive Driver with Enclosed Leads and Knockouts 96 Watts 24V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.