ADPT-DRJ-60-24 Adaptive Driver with Enclosed Leads and Knockouts 60 Watts 24V DC

Product Overview

The ADPT-DRJ-60-24 is a 60-watt, 24V DC constant-voltage adaptive driver designed for phase‑cut dimming systems. It ships with enclosed leads and integrated knockouts for field wiring.

Compact, black-finish housing measures 7.4 × 3.54 × 1.02 inches and provides a junction-style enclosure to simplify connections on site.

Key Features

• 60 watts output power at 24V DC (constant voltage)
• Phase-cut dimming compatible (adaptive driver)
• Enclosed leads with built-in knockouts for junction connections
• Black finish and compact housing (7.4" × 3.54" × 1.02")
• Single SKU: ADPT-DRJ-60-24

What this driver does

The ADPT-DRJ-60-24 is a constant‑voltage adaptive driver that supplies 24V DC up to 60 watts. It is intended to power low‑voltage LED fixtures or LED tape that require a stable 24V DC source.

• Constant-voltage output: 24V DC
• Rated output power: 60 W

Electrical output and dimming

This model supports phase‑cut dimming methods as an adaptive driver. Use with compatible phase‑cut dimmers and fixtures rated for 24V constant‑voltage operation.

• Dimming method: Phase-cut (adaptive)
• Output characteristics: constant voltage rather than constant current

Housing, dimensions, and connections

The driver comes in a black finish with an enclosed junction-style housing that includes knockouts and enclosed leads for field wiring. Its compact footprint helps with placement in tight junction boxes or mounting locations.

• Finish: Black
• Dimensions: 7.4 in (length) × 3.54 in (width) × 1.02 in (height)
• Includes enclosed leads and knockouts for wiring connections

Ordering notes

Confirm the exact model number and the quantity required before ordering. Verify that your fixtures and dimming controls are compatible with a 24V constant‑voltage, phase‑cut driver.

• SKU / Part Number: ADPT-DRJ-60-24
• Sold as: Each

Before You Order

Confirm the model number and the quantity required before ordering. Verify compatibility with your LED fixtures and dimming controls because this SKU is a 24V constant‑voltage, phase‑cut adaptive driver.

• Ensure fixtures accept 24V DC constant-voltage input.
• Confirm required wattage does not exceed 60 W per driver.
• Check that your dimmer is compatible with phase‑cut adaptive drivers.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ADPT-DRJ-60-24 Adaptive Driver with Enclosed Leads and Knockouts 60 Watts 24V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.