13.1ft Reel Rgb+wide Range Tunable Tape, 1800k-6000k (3 Diodes), Ip54,24v,7w/ft,includes 6 FT Lead & Tail Wires, W/2 Tl-7pwr-hd

Product Overview

The SPTL-RGBTWR is a 13.1‑foot reel of RGB plus wide‑range tunable LED tape light that blends full RGB color with a tunable white range from 1800K to 6000K.

This 24V tape consumes 7 watts per foot, is IP54 rated for dust and water spray protection, and ships with a 6‑foot lead, tail wires, and two TL‑7PWR‑HD connectors for straightforward integration.

Key Features

• Combined RGB color and wide‑range tunable white (1800K–6000K)
• 13.1 ft (one reel) — single SKU: SPTL‑RGBTWR
• 24 VDC power requirement, 7 W per foot
• IP54 environmental rating for indoor and protected outdoor applications
• Includes 6 ft lead, tail wires and two TL‑7PWR‑HD connectors

What this tape light does

The SPTL‑RGBTWR combines RGB full‑color output with a wide tunable white range from 1800K (very warm) to 6000K (cool daylight). It provides both mood‑setting color and continuously adjustable white light from the same tape, useful for accent, cove, or architectural lighting.

• RGB + wide‑range tunable white (1800K–6000K)
• Single 13.1 ft reel for continuous runs

Electrical and power requirements

Use a 24 VDC LED driver sized for the total wattage. The tape draws 7 watts per foot; calculate the required driver capacity by multiplying 7 W/ft by the installed length.

• Rated voltage: 24 VDC
• Power consumption: 7 W per foot

Environmental rating and mounting considerations

The tape carries an IP54 rating, which protects against limited dust ingress and water spray. IP54 makes it appropriate for indoor locations and some sheltered outdoor or damp areas, but it is not fully submersible and should not be used where it will be immersed or directly exposed to heavy water flow.

• IP54 — protection from limited dust and water spray
• Mounting: follow standard tape‑light practices (surface preparation, appropriate channels or clips) for secure installation

Included accessories and connections

The product includes a 6‑foot lead and tail wires to simplify connection to a driver or controller, and two TL‑7PWR‑HD connectors. Use compatible RGB+white controllers and a 24 V driver sized for the run and any additional loads.

• Includes: 6 ft lead, tail wires
• Includes: 2 × TL‑7PWR‑HD connectors
• SKU/Part number: SPTL‑RGBTWR

Key specifications

Reference the following core specifications when planning installation and specifying components.

• Length: 13.1 ft (one reel)
• Color temperature: 1800K–6000K (tunable white) + RGB
• Power: 7 W/ft
• Voltage: 24 VDC
• Environmental rating: IP54
• Sold as: Each

Before You Order

Confirm the model number (SPTL‑RGBTWR) and the quantity required before ordering. Verify driver and controller compatibility for RGB + tunable white operation and size the 24 VDC driver to the total wattage of the installation (7 W/ft × run length).

• Confirm controller supports RGB + tunable white (1800K–6000K)
• Calculate driver capacity: 7 W/ft × installed feet
• IP54 is not suitable for immersion—choose appropriate protection for exposed outdoor locations

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for 13.1ft Reel Rgb+wide Range Tunable Tape, 1800k-6000k (3 Diodes), Ip54,24v,7w/ft,includes 6 FT Lead & Tail Wires, W/2 Tl-7pwr-hd. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.