Invisible Slot - Single Bundle, 2M

Product Overview

The Invisible Slot - Single Bundle, 2M (SKU: PE-INVSLOT-2M-BNDL1) is a 78.74" (2 m) anodized aluminum extrusion kit designed for recessed/mud-in LED strip installations.

Each bundle ships as one complete kit including the aluminum channel, higher-grade UV-inhibited lens, lens insert for mud-in installation, feed, end caps, mounting clip, and a 180° splicing strip; the extrusion is not pre-drilled but includes countersunk holes.

Key Features

• Complete 2 m (78.74") extrusion bundle for a single run
• Anodized aluminum finish for corrosion resistance and consistent appearance
• Higher-grade lens with UV inhibitor and a lens insert intended for mud-in installations
• Includes feed, end caps, mounting clip, and 180° splicing strip for joining sections
• Extrusion supplied without pre-drilled holes; countersunk holes are provided

What this product is for

This extrusion bundle is intended to house and finish LED tape or linear light runs in recessed or mud-in applications where a low-profile, 'invisible slot' reveal is desired. The aluminum channel protects the LED strip and provides a clean architectural appearance when installed flush with a surface.

• Use with compatible LED strip lights sized to fit the channel width (verify LED tape dimensions before ordering).
• Suitable for continuous runs joined with the included 180° splicing strip.

What's included in the bundle

The Single Bundle (2M) ships as a complete kit to support one 2 m run without additional extrusion parts.

• 1 × 78.74" (2 m) anodized aluminum extrusion
• 1 × higher-grade UV-inhibited lens
• 1 × lens insert for mud-in installation
• Feed, end caps, mounting clip
• 180° splicing strip
• Extrusion supplied without pre-drilled holes; countersunk holes are present

Installation and mounting considerations

The product is provided without pre-drilled mounting holes (countersunk holes are present), allowing installers to position and drill for site-specific mounting. The bundle includes a mounting clip and a lens insert intended for mud-in (recessed) installation.

• Confirm mounting substrate and method prior to installation.
• Use the supplied feed and splicing strip when joining multiple sections.
• Lens insert is provided for embedding the lens flush with the finished surface in mud-in applications.

Materials and finish

The extrusion is anodized aluminum and includes a higher-grade lens with a UV inhibitor. The anodized finish provides a consistent appearance and basic surface protection appropriate for interior architectural installations.

• Finish: Anodized Aluminum
• Lens: Higher-grade with UV inhibitor
• Intended primarily for interior recessed/mud-in use

Key specifications

Reference the core product identifiers and simple sizing details for planning and ordering.

• SKU / Part Number: PE-INVSLOT-2M-BNDL1
• Sold as: Each (one bundle)
• Product length: 78.74" (2 m)
• Finish: Anodized Aluminum
• Package includes: extrusion, lens, lens insert, feed, end caps, mounting clip, 180° splicing strip

Before You Order

Confirm the model number and quantity required before ordering. Verify LED tape width and any desired diffuser finish to ensure compatibility with this extrusion and lens insert.

• This bundle supplies one 2 m extrusion run (SKU: PE-INVSLOT-2M-BNDL1).
• Check mounting substrate and whether mud-in installation is appropriate for your project.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Invisible Slot - Single Bundle, 2M. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.