High Output Pixel COB Tape Light IP54 RGBW

Product Overview

High-output continuous-orange COB pixel tape light with integrated digital RGBW pixels. Designed for linear pixel effects where a thin, even light source is required.

Key electrical and mechanical data: 24 VDC input, 560 LEDs per meter, 4.87 watts per foot, 10 mm width, 3.94" (100 mm) minimum cut increment, maximum run length 5 m.

Key Features

• Digital pixel RGBW output for individually addressable color and white control
• Chip-on-board (COB) construction for a continuous, low-glare light line
• IP54 rating for protection against dust and water splashes in protected indoor or semi-protected exterior applications
• High LED density: 560 LEDs per meter for smooth gradients and fine pixel resolution
• 24 VDC operation with 3.94" (100 mm) cut increments and 5 m maximum run

What this tape light does

This product is a high-output COB pixel tape light intended for digitally addressable RGBW pixel effects. It produces a continuous-looking light line with individually controllable pixels for animated, color-changing installations.

• Digital pixel RGBW color and white channels (addressable)
• COB construction reduces visible LED hotspots for a smooth appearance
• Useful for coves, signage accents, architectural outlines, and decorative linear effects

Electrical requirements and light performance

The tape is specified for 24 VDC operation and consumes 4.87 watts per foot. The documented lumen figure associated with the product is 230 lumens (product listing value).

• Voltage: 24 VDC
• Power consumption: 4.87 W/ft
• Luminous output (listing): 230 lumens
• Pixel control: digital/addressable RGBW (requires a compatible SPI pixel controller and appropriate power distribution)

Dimensions, cutting, and run limits

Use the tape’s defined cut increment and maximum run length when planning installations. Follow controller and power-supply layout best practices for pixel installations.

• Product width: 10 mm
• Cut increment: 3.94 in (100 mm)
• Maximum recommended continuous run: 5 m
• Product length (this SKU): 16.4 ft (sold as each)

Environmental suitability

The strip is rated IP54 for protection against dust ingress (limited) and water splashes. This rating supports use in indoor and some semi-protected outdoor locations but does not imply submersion resistance.

• Ingress protection: IP54 (protection from limited dust ingress and splashing water)
• Recommended for protected indoor areas and semi-protected exterior applications where occasional splashing may occur

Before You Order

Confirm the SKU and quantity required before ordering. This SKU is a digitally addressable RGBW COB pixel tape and requires a compatible SPI pixel controller, appropriate 24 VDC power supply, and correct wiring for pixel control. Verify installation environment and controller compatibility before purchase.

• SKU: HTL-COB-PXLRGBW-16
• Requires compatible SPI pixel controller and 24 VDC power supply (not included)
• Confirm cut increments and maximum run when calculating lengths and power injection points

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for High Output Pixel COB Tape Light IP54 RGBW. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.