STL65-WW Standard Tape Light IP65 3000K 16.4Ft

Product Overview

The American Lighting STL65-WW is a standard-grade, IP65-rated 24V tape light in warm white (3000K). It ships as a 16.4 ft reel designed for continuous runs and wet/damp-location protection.

Designed for linear accent and task lighting, this low-voltage LED tape offers high color fidelity (96+ CRI) at an energy rate of 2.19 W/ft and a nominal output of 115 lumens (per foot). It is cuttable at 6.56" intervals for field customization.

Key Features

• 24V low-voltage LED tape light — 16.4 ft (reel)
• Warm white 3000K color temperature
• High color rendering: 96+ CRI
• Power density: 2.19 W per foot
• Nominal luminous output: 115 lm (per foot)
• IP65-rated for protection against dust and water spray
• Cut points every 6.56" for straightforward field cuts

What this tape light is for

The STL65-WW is intended for linear accent, under-cabinet, toe-kick, cove, and other continuous-run lighting applications where a warm white appearance and high color fidelity are desired. Its 16.4 ft reel format supports long runs or multiple cut segments.

• Suitable for accent and task lighting in residential and commercial settings
• Reel format allows longer continuous runs without splicing

Light output and color performance

This tape light delivers warm white 3000K light with very high color rendering. The published metrics describe 96+ CRI and a nominal luminous output of 115 lumens per foot at 2.19 watts per foot.

• Color temperature: 3000K (warm white)
• Color rendering index: 96+ for accurate color appearance
• Luminous output: 115 lm per foot (nominal)
• Power: 2.19 W per foot

Environmental protection and suitability

The STL65-WW carries an IP65 rating, indicating protection against dust ingress and low-pressure water jets or spray. This rating makes the tape suitable for damp and some wet-location exposures where an IP65-rated product is specified.

• IP65-rated — protection from dust and water spray
• Can be used in installations that require an IP65-rated linear light (confirm local code and application requirements)

Length, cut points and physical size

The product is supplied as a single 16.4 ft (approximately 5 meter) reel. The tape is cuttable at 6.56-inch intervals to create shorter runs or segments for installation in fixtures, channels, or behind diffusers.

• Reel length: 16.4 ft
• Cuttable interval: 6.56 inches
• Physical width: 0.03 in (as provided)
• Weight (packaged): 0.4 lb

Electrical and power details

The STL65-WW is a 24V DC tape light. Use a compatible 24V LED driver sized to handle the total wattage of all tape segments in the run. Confirm power wiring and driver selection for run length and any series/parallel arrangements.

• Nominal input voltage: 24V DC
• Power density: 2.19 W per foot — calculate total wattage by multiplying by installed length
• Confirm appropriate LED driver capacity and wiring methods before installation

Before You Order

Confirm the model number and total length required before ordering. Verify the 24V driver sizing and any accessories (connectors, aluminum channel, diffusers, end caps) needed for your installation.

• Confirm STL65-WW is the correct 3000K, IP65 16.4 ft reel for your application
• Calculate total wattage (2.19 W/ft × installed feet) to select an appropriate 24V LED driver
• Plan for mounting, connectors, and any IP-rated end terminations as required by your installation

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for STL65-WW Standard Tape Light IP65 3000K 16.4Ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.