MLINK-120-CONKIT MicroLink 120V AC 6ft Power Connector Kit With Bare Wire

Product Overview

The MLINK-120-CONKIT is a 6-foot MicroLink power connector kit for 120V AC undercabinet lighting. It features a straight plug on one end and a bare (open) wire termination on the other for hardwiring into compatible drivers or fixtures.

Designed for concealed or visible installations where a transparent finish is preferred, this kit is sold as a single unit (SKU MLINK-120-CONKIT).

Key Features

• 6-foot (6') power cable length
• 120V AC input with straight plug on one end
• Open / bare wire termination on the opposite end for wiring to fixtures or drivers
• Transparent cable finish to minimize visual impact

What this kit does

The MLINK-120-CONKIT provides a convenient 120V AC power connection for MicroLink-compatible undercabinet lighting runs. One end terminates in a straight plug for connection to a standard 120V receptacle; the other end is an open, bare-wire lead intended for attachment to a compatible driver, terminal block, or fixture wiring.

• Supplies mains power to lighting drivers or fixtures via bare-wire termination
• Simplifies installation where a dedicated plug-to-fixture lead is needed

Typical applications

Use this kit for undercabinet lighting installations and other interior lighting applications that accept a 120VAC input with hardwired connection. The transparent finish is intended to reduce visual prominence when the cable is visible.

• Undercabinet lighting runs
• Interior retrofit projects requiring a plug-to-bare-wire connection
• Situations where a 6 ft lead length is appropriate for routing to a receptacle

Connections and wiring

The product pairs a straight 120V AC plug with an open-ended bare wire. The bare-wire end must be connected to the equipment’s appropriate line, neutral (and ground if provided) terminations following electrical codes and the device manufacturer’s wiring instructions.

• Straight plug at one end for standard 120V outlet connection
• Bare wire at the other end for attachment to drivers/fixtures
• Follow local electrical codes and fixture/driver wiring guidance when making connections

Length and finish

This kit has a 6-foot length and a transparent finish intended to blend with surrounding surfaces or fixtures where appearance matters.

• Cable length: 6 ft
• Finish: Transparent

Before You Order

Confirm the model number and quantity required before ordering. Ensure this 120VAC plug-to-bare-wire configuration matches the wiring and code requirements for your fixture or driver.

• Verify compatibility with your lighting driver or fixture wiring method before purchase.
• Have a qualified electrician perform or review permanent mains connections when required by code.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for MLINK-120-CONKIT MicroLink 120V AC 6ft Power Connector Kit With Bare Wire. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.