Westgate

Westgate and the Case for Field Selectable Stock

The most repeated idea across these 5,304 titles is choice deferred
to the job site: the WPMAX wall pack's MCTP designation means both the
wattage, 60, 80, or 100 watts, and the color temperature, 3000K, 4000K,
or 5000K, get set on the fixture itself, so one carton answers nine
different specifications. For a distributor shelf that translates into
stock that fits jobs not yet quoted, and for an installer it means the
truck already carries the right fixture. The exterior format leading
that charge lives store wide under wall packs.

Ribbon and Tape, Sold by the Thinking Foot

The low voltage side runs deep: ULR ribbon in 16 foot and 98 foot
listings at 1.5 watts and 100 lumens per foot, offered per color
temperature from 2700K through 5000K, which are the numbers a cove or
under cabinet layout actually calculates with. Per foot figures times
run length gives the load, the load sizes the driver, and skipping that
arithmetic is the classic way a beautiful cove ends up starved or
overdriven. The cut to length universe, this brand and others, rolls up
under tape light.

Strips and Architectural Linear

Between the ribbon and the outdoor gear sits the hardwired linear
middle, strip lights for shops and storage and a 568 title architectural
linear block for offices and retail where the fixture is part of the
ceiling design. The split to keep straight is duty: strips prioritize
lumens per dollar in unfinished spaces, architectural linear buys
appearance and optics for finished ones, and both halves carry the
brand's selectable habits into their titles. The store gathers the
utilitarian half under strip lights.

Step Lights and the Small Exterior Details

Small format pieces like the 3W SLE step light at 90 lumens and 4000K
handle the safety details that finish an exterior, stairs, walkway
edges, and transitions where a full fixture would glare. These specify
by mounting condition and beam behavior more than by output, so read
each listing against the actual wall or stair it serves, and remember
that low output placed correctly beats wattage sprayed everywhere. The
design side of that discipline continues in linear and architectural lighting.

Ordering From 5,304 Choices Without Drowning

The model codes are the map: family prefix, then the selectable
ranges, then finish, so WPMAX-60-100W-MCTP-BK decodes as the wall pack
family, its wattage span, the multi CCT and power feature, and a black
housing, and every family on the shelf follows its own version of that
grammar. Order by decoding rather than browsing, set every selectable
fixture on site to the documented spec so a campus stays uniform, and
put the whole mixed list through one trade quote. Anything here that
hardwires calls for a licensed electrician on the connection, and
exterior mounting must be rated for the fixture and its exposure.

Where Westgate Fits a Whole Property

One brand covering wall packs, step lights, ribbon, strips, and
architectural linear means a property manager can standardize
maintenance stock instead of curating a museum of one-off fixtures, and
the selectable models shrink that stock further since one unit covers
several installed settings. The exterior families beyond this shelf,
area, flood, and canopy formats included, browse together under outdoor lighting when the site package is bigger than the wall line.

Westgate Buying Questions

What does MCTP mean on Westgate wall packs?

Multi CCT and power: the fixture carries switches that set both the
wattage, 60, 80, or 100 watts on the WPMAX, and the color temperature
among 3000K, 4000K, and 5000K. One unit stocks for nine combinations,
and the installer commits it to the documented setting on site.

How do I size a driver for the ribbon runs?

From the per foot figures in the titles: 1.5 watts per foot times the
run length gives the connected load, and the driver must carry that
with headroom while matching the ribbon's voltage. Do the arithmetic per
run before ordering, because underpowered coves dim at the far end.

Should I buy strip lights or architectural linear for a ceiling?

By what the space is for. Unfinished and utilitarian rooms take
strips, where output per dollar rules, while customer facing and office
ceilings justify the architectural line's optics and appearance. Mixing
them by room type on one order is normal, not a compromise.

If fixtures are selectable, does the setting matter after install?

Completely. Selectable hardware standardizes purchasing, not
appearance, so a campus where installers leave switches wherever they
shipped ends up visibly mismatched. Write the chosen wattage and CCT
into the project documents and set every unit to it before the lift goes
back on the truck.